3Monitoring
Monitoring |
|
|
|
Event Monitoring | Duration | Off |
|
OSG Display | Date | On |
|
| Time | On |
|
| Title | On |
|
| Status | On |
|
Spot Out Channel | CH1 |
|
|
Spot Out Event Monitor | Off |
|
|
Monitor Out | Composite Out |
| |
|
| OK | Cancel |
●Event Monitoring
It is possible to set to Off / 3sec / 5sec / 10sec / 20sec / 30sec / Continuous.
①Off : Event Monitoring does not operate to turn to the screen where an event occurs.
➁3sec / 5sec / 10sec / 20sec / 30sec : Sets the duration time of screen in the Auto
Sequence mode.
➂Continuous : The Event Monitoring screen remains alive until you press the “Alarm” button in the front to cancel the screen manually.
●OSG Display
① Date : The date is displayed on the screen when it is On, and not displayed when it is Off.
➁ Time : The time is displayed on the screen when it is On, and not displayed when it is Off.
➂Cam name : The Cam name is displayed on the screen when it is on, and not displayed when it is off.
➃ Status : Audio/Ptz is displayed on the screen when it is on, and not displayed when it is off.
●Spot Out Channel
Spot Out channel is used to let one of two monitors monitor a channel, focusing on it. Spot Out channel supplies two functions, continuous monitoring of only one channel and Auto Sequence to display all the channels one by one.
① Auto Sequence setup ranges from Ch1 to Ch 4.
➁ In the Auto Sequence mode, Spot Out channels are displayed in turn.
➂ Duration time for Auto Sequence is as same as set for Camera setup.
●Spot Out Event Monitor
Sets if event monitoring will be executed for Spot Out channels.
① Off : The event monitoring dose not operate in the Spot Out channel.
➁ 3sec / 5sec / 10sec / 20sec / 30sec : Sets the duration time of screen in the Auto
Sequence mode.
➂Continuous : Once scrolled down, the screen remains displayed until you delete “Alarm” LED in the front manually.