Samsung SHR-6082N, SHR-6163P, SHR-6080P, SHR-6160P, SHR-6082P manual If adding HDDs to SHR-6082, 6162

5.When the installation of additional HDDs is done,

insert the lower and upper brackets into the DVR and fi x them with the provided screws.

6.When the installation of additional HDDs is done, connect the power cable and connect the HDD

signal cables (SATA Cable) to connectors c ~ h on the main board.

 You can check the HDD map directly on the DVR. Refer to “Storage Device > HDD Map”. (Page 44)

Note that the order of the HDD data cable is nothing to do with the operation. Just make arrangements of the connectors considering the length of each connector.

SHR-6080, 6160 & 6163 do not support DVD media.

2) If adding HDDs to SHR-6082, 6162 & 6164

2.Loosen the screws (x4) in the left/right and upper

sides to remove the upper bracket and loosen the lower screws (x2) to remove the lower bracket.

Upper Bracket

Lower

Bracket

 INSTALLATION

Upper Bracket

Lower Bracket

English _17