Samsung SHR-6162N, SHR-6163P, SHR-6080P, SHR-6160P, SHR-6082P Screen Setup, Setting the Spot Out

using the DVR

Screen Setup

Some monitors many not display information (camera name, icon, time information, etc.) about the DVR, depending on the condition. Then, you can change the display position of the data.

3.In the <Device> window, press the up/down (▲▼) button to move to <Monitor> and press the [ENTER] button.

4.Select the <Monitor> item.

5.Select <Display Position Setup> in the bottom.

You will move to the <Display Position Setup> window.

6.Use the four direction buttons or the number buttons on the front panel or the remote control to adjust the data position.

Display Position Setup

30

30

30

OK Cancel

30

Setting the Spot Out

You can set the DVR to output information / video apart from the monitor out.

Using the mouse may help easy setup.

3.Use the up/down buttons (▲▼) in <Device> window to move to <Monitor>, and press [ENTER] button.

4.Select <Spot Out>.

5.Use direction buttons (▲▼◄ ►) to move to a desired item, and set the value.

Monitor

Monitor	Spot Out		Mode
x Spot Out 1			Set Mode	ALL
		16-split
			Set Mode
			Set Mode
			Set Mode
x Event Display		OFF

OK Cancel

•Spot Out1 : You can select between 16-, 9-, 4-split, Auto Sequence, and Single.

•Set Mode : A window for “Set Spot Out” appears and you can set the channel for it.

You can set the dwell time between the screen switching in “Setting the Device > Camera> SEQ-Dwell Time”. (Page 42)

•Event Display : Sets the duration for the Spot Out on an event.

If selected <OFF>, an event will not output to the Spot Out.

M You can setup using the mouse right button in Live screen. Refer to “Spot Out”. (Page 31)

6.When the Spot Out is done, press <OK>.

Monitor

Monitor			Spot Out		Mode
x Spot	Set Spot Out
		1		2	Set Mode	CH 9,10,11,12
					3	4
		5		6	Set Mode	CH 13,14,15,16
					7	8
		9		10	11	12
x Event Display		13	OFF	14	15	16
					OK
				OK	Cancel

48_ using the DVR