Samsung SHR-6162P, SHR-6163P Before Start, Normal capacity 170mAh, Continuous standard load 0.2mA

Page 4

overview

BEFORE START

This user’s manual provides Information for using DVR such as brief introduction, part names, functions, connection to other equipment, menu setup, and the like.

You have to keep in mind the following notices:

SEC retains the copyright on this manual.

This manual cannot be copied without SEC’s prior written approval.

We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of instructions mentioned in this manual.

If you want to open the case of your system for checking problems, please consult the expert from the shop where you bought the product.

You may download open source codes from the following website: www.samsungsecurity.com.

Before installing an additional HDD or connecting an external storage device (USB memory or USB HDD) to this DVR, check the compatibility. Consult your provider for the compatibility list.

Warning

Battery

Exchanging a wrong battery in your product may cause an explosion. Therefore you must use the same type of battery as the one being used in the product.

The following are the specifi cations of the battery you are using now.

Normal voltage: 3V

CALIFORNIA USA ONLY

Normal capacity: 170mAh

This Perchlorate warning applies only to primary CR (Manganese Dioxide)

Continuous standard load: 0.2mA

Lithium coin cells in the product sold or distributed ONLY in California USA.

Operating temperature : -20°C ~ +85°C

“Perchlorate Material - special handling may apply,

See www.dtsc.ca.gov/hazardouswaste/perchlorate.”

(-4°F ~ +185°F)

 

 

JConnect the power cord into a grounded oulet.

The Mains plug is used as a disconnect device and shall stay readily operable at any time.

Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

System Shutdown

Turning off the power while the product is in operation, or taking not permitted actions may cause damage to the hard drive or the product. Also it can cause a dysfunction to the hard disk while using the product. Please turn off the power using the Power button on the front of your DVR.

After selecting <OK> in the pop-up menu, you can pull off the power cord.

You may want to install a UPS system for safe operation in order to prevent damage caused by an unexpected power stoppage. (Any questions concerning UPS, consult your UPS retailer.)

Operating Temperature

The guaranteed operating temperature range of this product is 0°C ~ 40°C (32°F ~ 104°F).

This product may not work properly if you run right after a long period of storage at a temperature below the guaranteed one.

When using the device after a long period of storage at low temperature, place the product at room temperature for a while and run it.

Especially for the built-in HDD in the product, its guaranteed temperature range is 5°C ~ 55°C (41°F ~ 131°F). Likewise, the hard drive may not work at a temperature below the guaranteed one.

4_ overview

Image 4
Contents Channel/16 Channel DVR Features OverviewImportant Safety Instructions  OverviewOperating temperature -20C ~ +85C Before StartNormal capacity 170mAh Continuous standard load 0.2mAPackage Contents Standards ApprovalsContents WEB Viewer AppendixPart Names and Functions Front Alarm RECMode AudioPart Names and Functions Rear 6080/6082 6160/6162/6163/6164Video OUT Audio OUTVGA USBRemote Control Using the numeric buttonsChannel Press each button between 1 toChanging the Remote Control ID Press any button among 1 toInstallation Checking the Installation EnvironmentRack Installation  InstallationHDD Addition  Fix the screws not to be loosened by vibrationsAdding a HDD  By factory default, the unit is equipped with one HDDIf adding HDDs to SHR-6080, 6160&6163  SHR-6080, 6160 & 6163 do not support DVD media If adding HDDs to SHR-6082, 6162Loosen the screws x4 in the left/right and upper fi x it with screws Connecting the VIDEO, AUDIO, and Monitor Connecting the NetworkConnecting to Internet through Ethernet 10/100/1000BaseT  Connecting with Other DeviceConnecting POS Device Connecting the USBConnecting to Internet through Adsl Connecting the Alarm INPUT/OUTPUT Connect the RS-485 device through the back port Connecting the RS-485 Device Ex DVRTX+/- ↔ SCC-C6433,35RX+ DVRTX+/- ↔ SCC-C6403,07TX+ Getting Started Starting the systemShutting Down the System  LiveLogin Locking All ButtonsLive Screen Configuration Icons on the Live ScreenError Information Split Mode MenuSplit Mode Menu Live Screen MenuSingle Mode Menu ZoomCurrent mode is highlighted in white View the Launcher MenuSystemDate/Time/LanguageTime. Click to display the hidden menu to the rightLive Mode Switching the screen modeSwitching the split mode Auto SequenceManual Switching Channel Setting10-16 Selecting a Spot Out mode Switching to Single ModeSpot OUT Multichannel Live MenuAudio ON/OFF in Single mode ZoomAudio ON/OFF FreezeEvent Monitoring Setting the Date/Time/Language System SetupDate/Time/Language Using the Calendar Setting HolidayUsing the DVR Setting the Administrator You can set and change Administrator’s ID and passwordWhen the administrator setup is done, press OK Permission ManagementSetting the Group Setting the UserSetting Permissions Select SetupWindow for Restricted Access and Auto Log out System ManagementUpdating the Software UsingDVR Log Information SettingsSystem Log Backup Log Event LogSetting the Device Setting the CameraCamera DeviceSetting the PTZ Confirming Devices Storage DeviceFormatting HDD Alarm Select HDD AlarmTheir durations appears Use direction buttons to move to the desiredRemote Devices POS DevicesRemote Device POS DeviceSetting the Monitor MonitorScreen Setup Setting the Spot OutSetting the Screen Mode When the screen mode setup is done, press OKYou can confi gure the Live screen and Split Screens Only the 13-split screen is optionalSetting the Recording Recording ScheduleRecord Recording ScheduleQuality / Resolution Setting Standard Recording PropertiesEvent Record Duration Recording Color TagsResolution Setting Event Recording PropertiesRecord Option Setting the Event Sensor DetectionNormal Close Sensor is closed EventSetting the Motion Detection Area ③ When the motion detection setup is done, press OKMotion Detection Motion DetectionAlarm Schedule Video Loss DetectionBackup Setting the BackupYou can backup the desired data to a connected device BackupNetwork Configuration Connection ModeSetting the Connection You can set the network connection route and protocolSetting the Protocol Move to Connection Mode, and press EnterButton Select ProtocolConnecting and Setting the Network When no router is usedWhen a router is used External Port Range Enter the TCP Port setTCP port can be different IP in Connection menu of the connected DVRLive Transfer Ddns SettingLive Transfer Smtp Setting Mailing ServiceEvent Setting Group Setting Recipient SettingUsing the PTZ camera Controlling a PTZ DevicePTZ Device Getting started with PTZPreset Setting Camera SettingSearch Time SearchBackup Search Event SearchSearch & Play You can search for events by the channel and play themPOS Search Motion SearchPOS Search Motion SearchPlayback Backup RangePlay What is Web Viewer? Product FeaturesIntroducing WEB Viewer System RequirementsConnecting WEB Viewer  WEB ViewerWeb viewer Using Live Viewer Single Mode Quad Mode Nine Mode Single ModeFull Screen Mode OSD Information DisplayConnected DVR Changing the Live Screen ModeChannels 10~16. In Sixteen MODE, the screen is refreshed Saving the Live Screen on the PC CH5 to CH8 CH9 to CH12Channel DVR Capture Saves the current screen into a BMP or Jpeg fi leUsing PTZ Camera Changing the Live Screen ChannelWeb viewer Using Search Viewer Sixteen Mode Saving the Live Screen on the PC Searching the Recorded Video in the Calendar Searching the Recorded Video in the TimelineViewer Setup You can confi gure the various settings of the DVR systemSystem Controlling PlaybackHoliday Permission ManagementSystem Management Camera DeviceStorage Device POS Device Remote DeviceMonitor Record For more information, refer to Setting the Recording.Recording Schedule REC Quality & Resolution EventEvent Record Duration Record OptionAlarm Schedule You can set the alarm output time if a video loss occursMotion Detection Video Loss DetectionNetwork ConnectionDdns Live TransferMailing Service SmtpAbout SEC Backup Viewer Recommended System Requirements Backup Viewer Product Specification Ntsc PALHDD Cifs Appendix RS-232C POS Product Overview SHR-6164Default Setting ManagementDuration Smtp Troubleshooting Retailer or the service center for more information By the service personnelOn the screen Navigate through the time bar
Related manuals
Manual 122 pages 40.24 Kb Manual 122 pages 13.87 Kb Manual 122 pages 20.37 Kb Manual 122 pages 33.72 Kb

SHR-6164P, SHR-6080P, SHR-6164P/CDM, SHR-6082N, SHR-6082P/CDM specifications

The Samsung SHR series of DVRs, specifically the SHR-6163P, SHR-6082P, SHR-6160P, SHR-6162P, and SHR-6080P, are designed to meet the demands of modern security and surveillance needs. These advanced digital video recorders offer an array of features and technologies that enhance usability, reliability, and performance.

At the core of the SHR series is the ability to provide high-definition video recording, ensuring that critical details are captured. The SHR-6163P can support up to 16 channels of recording, making it ideal for larger installations like commercial spaces or warehouses. Meanwhile, the SHR-6082P and SHR-6080P provide flexibility with up to 8 channels, catering to smaller setups without sacrificing quality.

The recording resolution is another standout feature across the series, with models supporting up to 4K recording for clearer and more detailed images. This high resolution is paramount for applications where identification and monitoring are critical. Additionally, the recording capabilities include real-time recording, enhancing the ability to capture events as they happen.

Another significant technology aspect is the integration of H.265 compression. This advanced video compression method significantly reduces the storage space required without compromising on image quality. It allows users to record longer, high-quality footage, making it an economical choice for those with substantial video needs.

The user interface of these DVRs is designed for seamless navigation, with an intuitive layout that allows for quick access to playback, search, and configuration functions. The SHR series is equipped with a robust remote viewing capability, allowing users to monitor their premises from anywhere using a smartphone or PC. This is essential for maintaining security when users are away from their sites.

In terms of connectivity, these DVRs support various network protocols and come with multiple USB ports for easy backup and export of data. The ability to connect to external storage solutions further enhances the flexibility of the system.

Moreover, the SHR series incorporates advanced motion detection capabilities, enabling users to set specific areas for motion alerts, which adds an additional layer of security. It also supports various alarm inputs, assisting in the integration of multiple security features.

In summary, the Samsung SHR-6163P, SHR-6082P, SHR-6160P, SHR-6162P, and SHR-6080P DVRs represent a powerful and versatile range of video recording solutions. With their emphasis on high-definition recording, advanced compression technologies, user-friendly interfaces, and robust security features, these devices are well-suited for a diverse array of surveillance applications. Whether for home security or large-scale monitoring, the SHR series stands out as a reliable choice.