Samsung SHR-6164P/CDM, SHR-6163P, SHR-6080P, SHR-6160P, SHR-6082P manual Camera, Storage Device

Page 86

web viewer

Device

You can check a list of devices that are connected to the DVR and conﬁ gure the necessary settings. Click <Device> in the menu screen.

For more information, refer to “SETTING THE DEVICE”. (Page 42)

Camera

•Camera

You can conﬁ gure the settings of the camera that is connected to the DVR.

•PTZ

You can conﬁ gure the settings of the PTZ camera that is connected to the DVR.

Set the ID and protocol.

Storage Device

You can check and change the settings of the storage device.

•Device

You will see a list of storage devices that are connected to the DVR.

You can check the type, used/total, usage and status of the device.

86_ web viewer

Image 86

Contents Channel/16 Channel DVR Features OverviewImportant Safety Instructions  OverviewNormal capacity 170mAh Operating temperature -20C ~ +85CBefore Start Continuous standard load 0.2mAPackage Contents Standards ApprovalsContents WEB Viewer AppendixPart Names and Functions Front Mode AlarmREC AudioPart Names and Functions Rear 6080/6082 6160/6162/6163/6164VGA Video OUTAudio OUT USBChannel Remote ControlUsing the numeric buttons Press each button between 1 toChanging the Remote Control ID Press any button among 1 toInstallation Checking the Installation EnvironmentHDD Addition Rack Installation Installation  Fix the screws not to be loosened by vibrationsIf adding HDDs to SHR-6080, 6160&6163  By factory default, the unit is equipped with one HDDAdding a HDD Loosen the screws x4 in the left/right and upper If adding HDDs to SHR-6082, 6162 SHR-6080, 6160 & 6163 do not support DVD media ﬁ x it with screws Connecting to Internet through Ethernet 10/100/1000BaseT Connecting the VIDEO, AUDIO, and MonitorConnecting the Network  Connecting with Other DeviceConnecting to Internet through Adsl Connecting the USBConnecting POS Device Connecting the Alarm INPUT/OUTPUT  Ex DVRTX+/- ↔ SCC-C6433,35RX+ DVRTX+/- ↔ SCC-C6403,07TX+ Connecting the RS-485 DeviceConnect the RS-485 device through the back port Shutting Down the System Getting StartedStarting the system  LiveLogin Locking All ButtonsLive Screen Configuration Icons on the Live ScreenSplit Mode Menu Error InformationSplit Mode Menu Live Screen MenuSingle Mode Menu ZoomSystemDate/Time/LanguageTime. Current mode is highlighted in whiteView the Launcher Menu Click to display the hidden menu to the rightSwitching the split mode Live ModeSwitching the screen mode Auto Sequence10-16 Channel SettingManual Switching Spot OUT Selecting a Spot Out modeSwitching to Single Mode Multichannel Live MenuAudio ON/OFF Audio ON/OFF in Single modeZoom FreezeEvent Monitoring Date/Time/Language System SetupSetting the Date/Time/Language Using the DVR Setting HolidayUsing the Calendar When the administrator setup is done, press OK Setting the AdministratorYou can set and change Administrator’s ID and password Permission ManagementSetting the Group Setting the UserWindow for Restricted Access and Auto Log out Setting PermissionsSelect Setup System ManagementDVR UsingUpdating the Software System Log SettingsLog Information Backup Log Event LogCamera Setting the DeviceSetting the Camera DeviceSetting the PTZ Formatting Storage DeviceConﬁrming Devices Their durations appears HDD AlarmSelect HDD Alarm Use direction buttons to move to the desiredRemote Device Remote DevicesPOS Devices POS DeviceSetting the Monitor MonitorScreen Setup Setting the Spot OutYou can conﬁ gure the Live screen and Split Screens Setting the Screen ModeWhen the screen mode setup is done, press OK Only the 13-split screen is optionalRecord Setting the RecordingRecording Schedule Recording ScheduleEvent Record Duration Quality / ResolutionSetting Standard Recording Properties Recording Color TagsRecord Option Setting Event Recording PropertiesResolution Normal Close Sensor is closed Setting the EventSensor Detection EventMotion Detection Setting the Motion Detection Area③ When the motion detection setup is done, press OK Motion DetectionAlarm Schedule Video Loss DetectionYou can backup the desired data to a connected device BackupSetting the Backup BackupSetting the Connection Network ConfigurationConnection Mode You can set the network connection route and protocolButton Setting the ProtocolMove to Connection Mode, and press Enter Select ProtocolConnecting and Setting the Network When no router is usedTCP port can be different When a router is usedExternal Port Range Enter the TCP Port set IP in Connection menu of the connected DVRLive Transfer Ddns SettingLive Transfer Event Setting Mailing ServiceSmtp Setting Group Setting Recipient SettingPTZ Device Using the PTZ cameraControlling a PTZ Device Getting started with PTZPreset Setting Camera SettingSearch Time SearchSearch & Play Backup SearchEvent Search You can search for events by the channel and play themPOS Search POS SearchMotion Search Motion SearchPlay Backup RangePlayback Introducing WEB Viewer What is Web Viewer?Product Features System RequirementsConnecting WEB Viewer  WEB ViewerWeb viewer Using Live Viewer Full Screen Mode Single Mode Quad Mode Nine ModeSingle Mode OSD Information DisplayChannels 10~16. In Sixteen MODE, the screen is refreshed Changing the Live Screen ModeConnected DVR Channel DVR Saving the Live Screen on the PCCH5 to CH8 CH9 to CH12 Capture Saves the current screen into a BMP or Jpeg ﬁ leUsing PTZ Camera Changing the Live Screen ChannelWeb viewer Using Search Viewer Sixteen Mode Saving the Live Screen on the PC Searching the Recorded Video in the Calendar Searching the Recorded Video in the Timeline System Viewer Setup You can conﬁ gure the various settings of the DVR system Controlling PlaybackHoliday Permission ManagementSystem Management Storage Device DeviceCamera Monitor Remote DevicePOS Device Recording Schedule For more information, refer to Setting the Recording.Record Event Record Duration REC Quality & ResolutionEvent Record OptionMotion Detection Alarm ScheduleYou can set the alarm output time if a video loss occurs Video Loss DetectionDdns NetworkConnection Live TransferMailing Service SmtpAbout SEC Backup Viewer Recommended System Requirements Backup Viewer Product Specification Ntsc PAL Appendix CifsHDD RS-232C POS Product Overview SHR-6164Default Setting ManagementDuration Smtp Troubleshooting On the screen Retailer or the service center for more informationBy the service personnel Navigate through the time bar

Related manuals

Manual 122 pages 40.24 Kb

Manual 122 pages 13.87 Kb

Manual 122 pages 20.37 Kb

Manual 122 pages 33.72 Kb