Samsung HW-J7500R/EN Adding the Soundbar to an Existing Multiroom Audio System, Rear of Soundbar

Adding the Soundbar to an Existing Multiroom Audio System

If the Samsung Multiroom app is already installed for use with another multiroom audio device, follow these steps to add the Soundbar.

1.Press and hold the SPK ADD button on the rear of the Soundbar for more than 1 second.

•There is a notification sound and the message

“ADD SPEAKER” appears on the Soundbar’s main unit. Afterwards, the message “WIFI READY” appears when standby-for-connection mode activates.

Wi-FiSETUP SPK ADD

DC 24V

24V DC ADD SPK SETUP Fi-Wi

Rear of Soundbar

SERVICE

AUX IN LAN HDMI IN HDMI OUT OPTICAL IN (TV-ARC)

2.Connect your smart device (smart phone, tablet, etc.) to your wireless router.

Internet Wireless Router Smart Device

3.Launch the Samsung Multiroom app.

4.Touch to go to the list of all speakers.

5.Select More > Add New Speaker in the app, and then follow the instructions on the app screen.

Complete the settings by following the instructions on the Samsung Multiroom app screen.

Start screen	Selection of network	Speaker addition
		complete

cTo connect a different network, select No.

You must enter the password of your wireless router to connect your Soundbar to your wireless network through the Samsung Multiroom app.

If your wireless router does not have a designated password, the app completes the initial settings without asking you to enter a password.

·9 · English