Samsung SCC-C6403P manual Alarm SET, Other SET

Page 26

6. ALARM SET

It consists of 4 ALARM INPUTs and 3 ALARM OUTs.It can sense an ALARM input from exterior SENSORs and it performs with PRESET or PATTERN function and outputs the ALARM OUT signals.

Alarm operation time depends on the Preset Dwell time corresponding to the alarm and whether AUTO is involved.

AUTO SET

This menu designates what to do at the time of ALARM input. Once an alarm is given, the camera will shortly move to the PRESET position corresponding to the respective alarm as follows.

PRESET1 to ALARM1~4 PRESET5 to MOTION

After DWELL TIME at a PRESET position, PATTERN or SCAN will be in action according to the AUTO SET setup.

** MAIN MENU **

CAMERA SET...

VIDEO SET...

PRESET...

ZONE SET...

AUTO SET...

ALARM SET...

OTHER SET...

SYSTEM INFO...

Press [Enter]

( ALARM SET)

ALARM PRIORITY SET ...

ALARM IN SET.. ALARM OUT SET.. AUTO SET..

AUX OUT CONTROL..

RET

Setup of OFF/PATTERN 1~3/HALF1/HALF2/FULL/SCAN1~4 is available. OFF dues not perform PATTERN or SCAN after moved to PRESET and each menu has its own function as follows.

PATTERN 1~3 : Preset PATTERN action,

HALF1 : Continuous operation of PATTERN1 + PATTERN2

HALF2 : Continuous operation of PATTERN2 + PATTERN3

FULL : Continuous operation of all the aboves

SCAN 1~4 : Scanning as set

AUX OUT CONTROL

E

ALARM PRIORITY SET

This sets the priority of the 4 ALARM inputs so ALARM can work corresponding to the priority.

The priority of the DEFAULT is ALARM1, ALARM2, ALARM3, ALARM4. If the ALARM is working at the same time and the priority is the same, it will operate according to the DEFAULT priority. While the ALARM is working, it cannot detect MOTION.

ALARM IN SET

This sets the input TYPE to "NO" (Normal Open), "NC" (Normal Close), or "OFF" depending on the features of the SENSOR connected.

ALARM OUT SET

Each ALARM input corresponds to one of the 3 ALARM OUT.

This sets the ALARM OUT motion to continue or act only when the ALARM is working.

If it is set to OFF the ALARM OUT motion will operate only when the ALARM is working.

(Active "Low"), and if it's set to ON, the ALARM OUT will always operate regardless of the ALARM.

7. OTHER SET

PROPORTIONAL P/T

This function controls the PAN/TILT speed to the ZOOM magnification ratio during the manual operation of PAN/TILT. If you set PROPORTIONAL P/T to ON, the PAN/TILT speed will increase in the ZOOM WIDE mode and decrease in the ZOON TELE mode even in the same manual operation.

3-26

3-27

Image 26
Contents SCC-C6403P Important Safety Instructions Safety PrecautionsFCC Statement Table of contents Before UsageChapter CC- C6403 P Overvie wSCC-C6403P Introduction Locations of ControlAdapter Connection Initial Setting Setting RS-422A/RS-485 terminationChecking Package Contents Before InstallingCC- C6403P Installatio n Cable Connection Power Adapter CablePreparing the Cables Video CableSeparately Sold Products for Installation Installing SCC-C6403PInstallation Precautions Pole Mount Adaptor SADT-100PM Installing the CameraCeiling Mount Adaptor SADT-100CM Setup Menu Overv iew Assemble COVER-BODY onto the DomeStructure of the Setup Menu Camera ID Camera SET MenuSync COLOR/BW Motion DETDisplay Zoom Digital ZoomZoom Speed Display P/TIris Video SET MenuExit ALCMotion ShutterAGC FlickerlessWhite BAL DISSpecial PresetFocus Mode LevelZone SET Location Zone EnableZone Area Zone ID SETSpeed Auto SETAuto PAN Dwell TimeScan Auto PlayAuto Return Play NumberAlarm SET Other SETSystem Info Short Keys Function KeyProduct specifications SCC-C6403PBenutzerhandbuch D Achtung SicherheitshinweiseWarnung Vor Inbetriebnahme InhaltsverzeichnisApite l 1 Ü b erblick über die S C C C640 3P Einführung in die SCC-C6403P SteuerungselementeAdapteranschluss Ersteinstellung Einstellung der RS-422A/RS-485 AbschlüsseÜberprüfung des Verpackungsinhalt Vor der InstallationApite l 2 I nstallation der S C C C6403 P Netzanschlusskabel Vorbereitung der KabelKabelanschlüsse Video-KabelSeparat erhältliches Zubehör für die Installation Installation der SCC-C6403PSicherheitshinweise für die Installation Wandhalterung SADT-100WMMasthalterung SADT-100PM Installation der KameraDeckenhalterung SADT-100CM Kapitel 3 Überblick über das Setup-Menü Aufbau des Setup Menüs Kamera Prog Kamera IDFARBE/S/W AktivitaetZoom Gesch Die Tasten Links, Recht BenutzenBlende Video PROG-MenüAusgang BLCBewegung FlimmerfreiWeissabgl Fokus Mode SpezialProg Zone Zone ID Setzen Zone GesetztPosition Zone AktivierenPositions Prog Auto ProgGeschwindigk Funktionsnummer Auto ModusAuto Zurück Alarm Prog Weitere ProgAuto Flip KAM ResetAutokalibrier SpracheKurztasten Funktion TasteTechnische Daten Korrekte Entsorgung dieses Produkts ElektromüllManuel d’instruction F Manual del usuario Es Precaución Medidas de seguridadAdvertencia Antes de Instalar el equipo IndiceCa pítu l o 1 C ara c terísticas del SCC C640 3P Introducción del SCC-C6403P Localización de controlesConexiones del adaptador Ajustes Iniciales Chequeo del contenido de la caja Antes de la instalaciónApítu l o 2 Instalación del SCC C6403 P Cable de alimentación Preparación del cableConexión del cableado Cable coaxialProductos para la instalación que se venden por separado Instalación de la cámara SCC-C6403PMedidas de precaución para la instalación Adaptador DE Montaje EN Poste SADT-100PM Instalación de la cámaraAdaptador DE Montaje EN Techo SADT-100CM Capít ulo 3 Menú de ajuste s Figura 8 Monte el Cuerpo DE LA Cubierta en el DomoEstructura del menú de ajustes Cámara ID Prog CámaraSinc Abajo /IZQUIERDO/ DERECHO/ EnterDET Movi ApareceráVEL Zoom Zoom DigitalDiafragma Prog VideoSalida Cluz Submenú del menú ALC/MANUMovi ObturadorCAG Oscilacion REDBAL Blanco Modo Foco EspecialProg Zona Fijar Area Zona Fijar DIR ZonaPosición Fijar ID ZonaRonda Prog AutoVelocidad Prog PosiciónBarido Auto ReproducAuto Volver REP. NúmeroAlarma Prog Altra ProgTurbo CÁM ResetINFOR. Sistema IdiomaClaves Cortas Función ClaveEspecificaciones de producto AtenciónIstruzioni per l’uso Attenzione Norme di sicurezzaAvvertenza Prima dell’uso IndiceCapitol o 1 D e s c rizione di SC C -C6403 P Introduzione al modello SCC-C6403P Collocazione dei comandiRelay esterno Impostazioni Preliminari Impostazioni di terminazione RS-422A/RS-485Controllo del contenuto della scatola Prima dell’installazioneCapito l o 2 I ns t allazione di SCC -C6403 P Cavo dell’adattatore Preparazione dei caviConnessione del cavo Cavo videoPrecauzioni da adottare Installazione della telecamera SCC-C6403PAccessori per l’installazione venduti separatamente Adattatore PER IL Montaggio SU Palo SADT-100PM Installazione della telecameraAdattatore PER IL Montaggio a Soffitto SADT-100WM Capitolo 3 Descrizione del menù di Setup CupolaStruttura del menù di Setu Prog Camera ID CameraLivello Colore AGC COLORE/B/NActivity DET Zoom Digitale Utilizzare i tasti Sinistra, DestraSalva UscitaEsci Activity BIL Bianco UtilModo Fuoco SpecialeProg Posizione ID PresetPreset Velocità Imposta DIR. ZonaID Zona Attivo Imposta ZonaPosizione Zona AbilitataProg Posizione VelocitàPercorso Auto PANScansione Scansione AUTRIT POS Auto NUM. FunzioneProg Allarmi Auto Info SistemaAuto Calibraz LinguaCamera FAN Error Chiavi CortoSpecifiche di prodotto Avvertenze
Related manuals
Manual 29 pages 47.4 Kb Manual 85 pages 9.6 Kb

SCC-C6403P specifications

The Samsung SCC-C6403P is a high-performance CCTV camera designed to meet the surveillance needs of a variety of environments, including commercial spaces, residential areas, and industrial sites. This model is renowned for its exceptional image quality, robust construction, and advanced features that ensure reliable monitoring and security.

One of the standout features of the SCC-C6403P is its superior image resolution. With a robust sensor that offers high-definition video capture, this camera provides clear and detailed images, even in low-light conditions. The integration of a 1/3" CCD sensor enhances the camera's capability to capture intricate details, which is vital for effective surveillance. This feature is particularly beneficial in scenarios requiring the identification of individuals or objects.

Another significant characteristic of the SCC-C6403P is its advanced low-light performance. Equipped with enhanced infrared capabilities, the camera can capture footage in complete darkness, offering peace of mind for users who require 24/7 monitoring. This is achieved through an automatic IR cut filter, which switches between day and night modes seamlessly, ensuring consistent performance despite varying light conditions.

The camera also boasts a robust housing design that is both weather-resistant and durable. With an IP66 rating, the SCC-C6403P can withstand harsh outdoor conditions, including heavy rain and dust infiltration. This durability makes it an ideal choice for a range of installations, from outdoor parking lots to indoor commercial facilities.

In terms of connectivity, the Samsung SCC-C6403P is equipped with versatile options to facilitate easy integration into existing surveillance systems. It supports various connection protocols and is compatible with several video management systems, providing flexibility and scalability for future expansions.

Furthermore, the camera features advanced motion detection technology, allowing it to differentiate between human movement and other forms of motion. This capability significantly reduces false alarms, ensuring that users are alerted only to genuine security threats.

In conclusion, the Samsung SCC-C6403P is a robust surveillance solution that combines high-definition video, advanced low-light performance, and durable construction. Its versatile connectivity and intelligent features make it a reliable choice for businesses and homeowners alike, ensuring comprehensive security and peace of mind in any environment.