Polycom C16, SR12, C12, C8 manual Plug-in Card Installation

Page 14

Hardware Installation Guide for the Polycom SoundStructure C16, C12, C8, And SR12

•Connect AC power. (See page 2-19.)

•Configure devices using SoundStructure Studio software. (See page 2-20.)

Plug-in Card Installation

Each SoundStructure device can have a plug-in card installed for a total of eight plug-in cards in a collection of eight SoundStructure devices. When installing more than one plug-in card in an installation, it is recommended to use the plug-in slot from the top device first and continue sequentially down through the collection of devices as additional plug-cards are added.

Warning Do not insert a plug-in card while the SoundStructure is powered on.

Failure to remove power prior to installing the plug-in card may damage the plug-in card and/or the SoundStructure device.

To install a plug-in card, follow these five steps:

1.If plugged in, unplug the AC power cord from the SoundStructure device.

PIN 2: TXD

PIN 3: RXD

PIN 5: GROUND

PIN 7: CTS

PIN 8: RTS

RS-232

LAN

C-LINK2

IN OBAM OUT

IR 12V

2.Remove the blank plate and screws from the expansion slot (see below).

PIN 2: TXD

PIN 3: RXD

PIN 5: GROUND

PIN 7: CTS

PIN 8: RTS

RS-232

LAN

C-LINK2

IN OBAM

IR 12V

2 - 4

Image 14

Contents

Revision a Trademark Information Contents Accessories -1 Regulatory Notices And Warranty Information Logic ExamplesPreparing For Installation OverviewInstallation Overview Product FeaturesPackage Contents Page Tools Needed For Installation Safety RecommendationsPower Supply Considerations General Site RequirementsInstalling The SoundStructure C16, C12, C8, And SR12 Panel DiagramsFront-Panel Front-panel LEDs are interpreted as followsInstalling The Hardware Rear PanelPlug-in Card Installation Phone Line Rack-Mounting The Polycom SoundStructure Device Connecting To The LAN Interface Connecting To Other Polycom Equipment With Conference Link2LINK2 Obam OUT Device ID’s SoundStructureTM C8 IR Port RS-232 Making Audio Connections Connecting Logic Ports Balanced Audio Connections Unbalanced Audio ConnectionsRemote Control Pin Signal Logic Inputs Logic Outputs Powering Up The System Logic Output High On Low OffConfiguring The SoundStructure Devices Specifications Technical SpecificationsThermal Telco Pin Out Summary Conference Link2Obam Link WhiteIR Receiver RS-232Logic Interface Audio Connections Balanced Audio Connections Unbalanced Audio Connections Page Logic Input Contact ClosureLogic Output SoundStructure Powered RelayExternally Powered Relay Driving An LED Logic Input And Output Push To Talk MicrophonesAnalog Gain Control Page Accessories Page Regulatory Notices USA And CanadaExhibit J Customer Information Data Equipment CanadaEEA European Economic Area Including Switzerland Česky CzechΕλληνική Greek Polish Center for Testing and Certification Notice Dyrektywy 1999/5/WE Australia Japan VcciKorea Rest Of WorldWarranty Information Regulatory Notices And Warranty Information

Related manuals

Manual 60 pages 34.52 Kb