Polycom C16, SR12, C12, C8 manual Polish Center for Testing and Certification Notice

Hardware Installation Guide for the Polycom SoundStructure C16, C12, C8, and SR12

Magyar [Hungarian]:

Alulírott, Polycom (UK) Ltd nyilatkozom, hogy a SoundStructure megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.

Norsk [Norwegian]:

Polycom (UK) Ltd erklærer herved at utstyret SoundStructure er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.

Polski [Polish]:

Niniejszym Polycom (UK) Ltd oświadcza, że SoundStructure jest zgodne z zasadniczymi wymaganiami oraz innymi stosownymi postanowieniami.

Polish Center for Testing and Certification Notice

The equipment should draw power from a socket with an attached protection circuit (a 3-prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source.

The phasing conductor of the room's electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A).

To completely switch off the equipment, the power supply cable must be removed from the power supply socket, which should be located near the equipment and easily accessible.

A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of standard PN-EN 55022.

6 - 6