Samsung NZ63J9770EK/EF manual Safety instruction

Page 7

CAUTION

Be sure the appliance is properly installed and grounded by a qualified technician.

The appliance should be serviced only by qualified service personnel. Repairs carried out by unqualified individuals may cause injury or serious malfunction. If your appliance is in need of repair, contact your local service centre. Failure to follow these instructions may result in damage and void the warranty.

Flush - mounted appliances may be operated only after they have been installed in cabinets and workplaces that conform to the relevant standards. This ensures sufficient protection against contact for electrical units as required by the essential safety standards.

If your appliance malfunctions or if fractures, cracks or splits appear:

switch off all cooking zones;

disconnect the hob from the mains supply; and

contact your local service centre.

If the cooktop cracks, turn the appliance off to avoid the possibility of electric shock. Do not use your hob until the glass surface has been replaced.

Do not use the hob to heat aluminium foil, products wrapped in aluminium foil or frozen foods packaged in aluminium cookware.

Liquid between the bottom of the pan and the hob can produce steam pressure. Which may cause the pan to jump.

Always ensure that the hotplate and the base of the pan are kept dry.

The cooking zones will become hot when you cook. Always keep small children away from the appliance.

Keep all packaging materials well out of the reach of children, as packaging materials can be dangerous to children.

English  7

Safety instruction

NZ63J9770EK_EF_DG68-00635A-00_EN.indd 7

2015-01-15 ￿￿ 2:42:57

Image 7
Contents Induction Hob Contents Warranty and service Using this manual Safety instructions Safety instruction Safety instruction Safety instruction Proper disposal of your old appliance Disposing of the packaging materialSafety instruction Safety instructions for the installer Installing the hobConnecting to the mains power supply 02 04 750 mm Installing into the countertopMax mm, Min mm Min mm 15 mm 520 mm 480 mm 25 mm Min mm Installing the hob Cooking zones Parts and featuresControl panel Induction heating ComponentsKey features of your appliance Safety shutoff Virtual flame technology Temperature detection Residual heat indicatorHob use Initial cleaningCookware for induction cooking zones Size of pans Suitability testOperating noises Using suitable cookware Switching the appliance on Using the touch control sensorsSelect cooking zone and heat setting Quick stop Switching the appliance offUsing the child safety lock Timer Use Power boost control Using keep warmPause Power managementTouch the Wide Flex zone sensor Flex controlSound on/off Suggested settings for cooking specific foods Hob Cleaning and careLight soiling Stubborn soiling Problem dirtTo avoid damaging your appliance Hob frame optionFAQs and troubleshooting Warranty and serviceInformation code Possible cause Solution Service Technical data Technical dataSupplier’s name Product informationQuestions or Comments
Related manuals
Manual 144 pages 24.94 Kb Manual 1 pages 26.59 Kb