Charging

Samsung WF9702N3C/YLE, AQV12KBBX Charging, Check the charge status of the robotic vacuum Cleaner

Page 22

Operating the cleaner

Installing the robotic vacuum cleaner

When the product is initially purchased, the battery		Charging Lamp
is fully discharged, and you must charge the robotic	Power Lamp	Charging Lamp
	Power Lamp
vacuum cleaner manually.

Turn on the Power Switch at the bottom of the product.

1.After aligning the charge pins of the main unit with the charge pin of the charger station, press the main unit until you hear a “Recharging power” sound from the charger.

-The Charging Lamp turns green.

Power Lamp

Charging Lamp

2. Check the charge status of the robotic vacuum

cleaner.
- When charging starts, the battery level indicator and
“ ” will be displayed in sequence in the display panel.
- When charging is complete, the battery level indicator and	Charging	Fully charged
“FULL” will be displayed in the display panel.	Charging	Fully charged

Flash

■ When the battery level display flashes	<Charge display>


while cleaning, the robotic vacuum
cleaner stops vacuuming and	complete	charging
automatically charges itself at the charger.	complete	charging
	Charge Charging	Required

■When the battery level flashes and “LO” is displayed while cleaning, robotic vacuum cleaner cannot be operated by the remote control or the buttons on the main unit. In this case, directly carry the robotic vacuum cleaner to the charger to charge the battery. (This is when the battery is completely discharged.)

● When the product is initially purchased, it will take about 120 minutes to fully charge the battery NOTE ● and will run for about 90 minutes.

When charging the battery while the battery is over-heated, the charging time can increase.

●Measures to take when charging is not smooth.

When the robotic vacuum cleaner cannot be automatically charged, check the following:

-Turn the Power Switch at the bottom of the robotic vacuum cleaner off and on (Reset).

-Re-plug the power of the charger (Reset).

-Check whether there are any foreign substances on the charge connector and wipe the charge connector on the main unit and the charger with a dry cloth.

-Check whether there are objects near the charger that are strong reflectors.

●When separating the robotic vacuum cleaner from the charger, it will discharge naturally.

-Charge the robotic vacuum cleaner through the charger, if possible. (When leaving your home unattended for a long period of time due to a business trip, travelling etc., turn off the Power Switch of the robotic vacuum cleaner and unplug the power of the charger to store them.)

22_ Operating the cleaner

Image 22

Contents

Robotic Vacuum Cleaner Thank you for purchasing a Samsung productSafety information Indicates that a danger of death or serious injury existsImportant Safety Instructions Robotic Vacuum Cleaner Contents Make sure to remove any dust or water from the power plug Power relatedThis may result in fire or electric shock Open all doors to clean all rooms Before activating the robotic vacuum cleaner, make sureNever use robotic vacuum cleaner in locations with Before useRemove objects scattered on the floor before cleaning Clear the area This will result in critical damage to the chargerThis may result in damage to carpets This may result in damage when the unit accidentally dropsUse This may result in malfunctionCleaning robot cannot move over carpets after the mop Cleaning and maintenanceThis product is not suitable for wet mops. option Failing to do so may result in fire or electric shock Failing to do so may result in bad odorsVarious Cleaning Modes Product FeaturesDelicate Cleaning of Every Corner Convenient Virtual Guard FunctionAuto Charging Edge-Cleaning Side Rotating BrushSafety device Doorsill CrossingAssembling the cleaner ComponentsName of each part Mode Lamp Main Body Distance Detection Sensor Charger StationRemote Control Cleaning Mode Display Battery Level IndicatorScheduled Cleaning Cleaning ModeTurning the power switch on or off Operating the cleanerInstalling the robotic vacuum cleaner Instalation orderArrange the power cord along the wall Installing the chargerAlways keep the power cord of the charger Check the charge status of the robotic vacuum Cleaner ChargingAbout the battery Setting the time You can only set the time using the remote controlPower button Mode lamp flashes red Installing the virtual guard optionMode Infrared devices and a device may not About the IrDA sensorWork in front of another device with a Higher priority Attaching a mop option Using the robotic vacuum cleanerMop plate from the cleaning robot before cleaning a carpet You can effectively remove dust with the microfiber mopStarting/stopping cleaning You can run or stop all robotic vacuum functionsRecharging Turbo Mode Auto cleaningNormal Mode Judges cleaning to be complete and does not resume CleaningYou can conveniently clean a specific area that has a a Spot cleaningEdge Mode Cleaning Complete Lot of cookie crumbs, dust, and etcTurbo Mode Edge Mode Max cleaningAbout the Resume Cleaning function Normal Mode Turbo Mode Edge Mode Manual cleaningTurbo Or Off turbo Scheduled cleaning Operating the cleaner Setting daily cleaningPlease keep the cleaning and maintenance methods in mind Cleaning the robotic vacuum cleanerUsing additional functions Maintain tools and filterEmptying dust quickly Cleaning the sensor window and the cameraRear Sensor Window Install the filter into the dust bin Cleaning the dust bin and the filterFirst, empty the dust bin before cleaning it Close the dust bin cover and install it into the main unitCleaning the power brush Filter Dust Outlet Cover Dust Bin CoverMaintain tools and filter Cleaning the edge-cleaning side rotating brush Cleaning the driving wheel Caring for the mop optionTroubleshooting Checklist before svc callsCleaner passes Symptom Checklist Measure to Take Robotic vacuumCleaner cannot BatteryError Code Cause Troubleshooting for error codesPower brush How to remove the battery Troubleshooting Troubleshooting Mm Height Mm Length Mm Width Product specificationMm Height Classification Detail SpecificationsCleaning method MechanicalOpen Source Announcement OpenCV

Related manuals

Samsung WF9702N3C/YLE, AQV12KBBX Charging, Check the charge status of the robotic vacuum Cleaner

Operating the cleaner

Installing the robotic vacuum cleaner

Charging

2. Check the charge status of the robotic vacuum

cleaner.

while cleaning, the robotic vacuum

cleaner stops vacuuming and