Operating the cleaner
Using the robotic vacuum cleaner
Max cleaning
The robotic vacuum cleaner automatically moves and cleans until the battery runs out and the battery level flashes only one level.
■ If cleaning begins when the robotic vacuum cleaner is docked with the charger station, the time to return to the charger is decreased since the robotic vacuum cleaner remembers its original position while moving.
■If the battery level becomes low while cleaning, the robotic
vacuum cleaner automatically returns to the charger station and resumes cleaning after charging the battery. (Number of resumed cleaning operations: Once)
Main unit button Remote control button Configuration Sequence
1 Set the mode.
▶ 
3times
2 Cancel the mode.
Normal Mode
About the Resume Cleaning function
NOTE ● If the robotic vacuum cleaner judges cleaning to be complete, resume cleaning is not performed.
●If you move the robotic vacuum cleaner while it is being charged or press a button, robotic vacuum cleaner judges cleaning to be complete (cleaning is not resumed).
●Do not move the robotic vacuum cleaner while it is cleaning
CAUTION | or press a button while cleaning. Otherwise, the robotic |
| vacuum cleaner judges cleaning to be complete and starts |
cleaning again from the beginning.
●When you press the Turbo remote control button, either On
turbo (
) or Off turbo (
) is displayed on the display panel in turns. When On turbo is displayed, you can clean the floor in Turbo Mode.
●When you press the Edge remote control button, On Edge
(
) or Off Edge (
) is displayed on the display panel in turns. When On Edge is displayed, you can clean the floor in Edge Mode.
●If you select both Turbo Mode and Edge Mode at the same
time, the (
→ 
) is display on the display panel in turns.
32_ Operating the cleaner