Operating the cleaner
Using the robotic vacuum cleaner
Auto cleaning
The robotic vacuum cleaner will move by itself and automatically clean the house until cleaning is completed once.
■ If cleaning begins when the robotic vacuum cleaner is docked with the charger station, the time to return to the charger is decreased since the robotic vacuum cleaner remembers its original position while moving.
■If the battery level becomes too low while cleaning, the robotic
vacuum cleaner will automatically return to the charger station and resume cleaning after charging its battery. (Number of cleaning operations resumed : Once)
Main unit button Remote control button Configuration Sequence
1 Set the mode.
▶ 
1times
2 Cancel the mode.
Normal Mode
About the Resume Cleaning function
NOTE ● If the robotic vacuum cleaner has evaluated that cleaning is complete, the resume cleaning function is not performed.
●If you move the robotic vacuum cleaner when it is being
charged or press a button, the robotic vacuum cleaner | Turbo Mode |
judges cleaning to be complete and does not resume |
|
cleaning. |
|
● Do not move the robotic vacuum cleaner when it is cleaning CAUTION or press a button while it is cleaning. Otherwise, the robotic
vacuum cleaner judges cleaning to be complete and starts cleaning again from the beginning.
●When you press the Turbo remote control button, either On
turbo ( 
) or Off turbo ( 
) is displayed on Edge Mode the display panel in turns. When On turbo is displayed, you
can clean the floor in Turbo Mode.
● When you press the Edge remote control button, On Edge
( 
) or Off Edge ( 
) is displayed on the display panel in turns. When On Edge is displayed, you can clean the floor in Edge Mode.
●If you select both Turbo Mode and Edge Mode at the same
time, the ( | → | ) is display on the display panel in Cleaning Complete |
turns. |
|
|
30_ Operating the cleaner