Samsung HMX-E10OP/EDC, HMX-E10BP/EDC manual Rst time settings, Built-in rechargeable battery

fi rst time settings

TURNING THE POWER ON FOR THE FIRST TIME AND SETTING THE DATE AND TIME

Set the date and time of your local area when you turn on the camcorder for the first time.

1.Press the Power ( ) button to turn on the camcorder.

•When you turn on your camcorder for the first time, the Date/ Time Set screen appears.

2.Set the date and time by touching the corresponding item or

dragging the Up ( ) or Down ( ) tabs.

3.Touch the ( ) tab.

•The message “Date/Time Set” appears.

Date/Time Set

Day Month Year

01 qhu 2010

Hr Min

00 00

Date/Time Set

Day Month Year

01	Date/Time Set
	qhu	2010

01/JAN/2010 00:00

Hr Min

00 00

• The year can be set up to 2040.

•Set “Date/Time Display” to On. ¬page 57

Built-in rechargeable battery

•Your camcorder includes a built-in rechargeable battery that retains the date and time settings even after the power is turned off.

•If the battery is depleted, the current date/time values are reset to the default values. You need to recharge the built-in rechargeable battery (see below), and then re-set the current date and time.

Charging the built-in rechargeable battery

•The built-in battery is always recharged while the built-in USB plug of the camcorder is connected to a PC or while the battery is inserted.

•If you have not used the camcorder for about 2 months and have not connected it to a computer

using its USB plug or inserted the removable battery, the built-in battery fully discharges. If this occurs,	25
charge the built-in battery by connecting the built-in USB plug to a computer for 24 hours.