Samsung EC-M110ZSDE/AS, EC-M110ZSDB/E3 manual Up / Down / Left / Right Select an, Image to print

Playback ()

ξ Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be deleted. Remember that this will permanently delete unprotected images. Important shots should be stored on a computer before deletion takes place. The startup image is stored in the camera’s internal memory (i.e., not on the memory card) and it will not be deleted even if you delete all files on the memory card.

DPOF

DPOF(Digital Print Order Format) allows you to embed printing information on your memory card’s MISC folder. Select the pictures to be printed and how many prints to make.

The DPOF indicator will appear on the LCD monitor when an image that has DPOF information plays back. Images can then be printed on DPOF printers, or at an increasing number of photo labs.

This function is not available for Movies and Voice recording files.

When the wide angle image is printed as a wide angle print, 8% of the left and right side of the image might not be printed. Check that your printer can support the wide angle image when you print the image. When you print the image at a photo lab, request that the image is printed as a wide angle image. (Some photo labs may not support the wide angle size print.)

„Standard

This function allows you to embed printing quantity information on a stored image.

1. Press the Up / Down button and select
the [DPOF] menu tab. And then press the	PLAYBACK
Right button.	Standard	Select
	Index	All Pics
	Size	Cancel
2. Press the Right button again and
[Standard] sub menu will display.	Back	Set
3. Select a desired sub menu by pressing
the Up / Down button and press the OK
button.
[Select] : Selection window for an image to	W		T
print is displayed.		00 Images
		Set

-Up / Down / Left / Right : Select an

image to print.

-Zoom W / T Button : Select the number of prints.

[All Pics] : Configure number of prints for all	W 00 Images T
	Set
pictures except movie and voice
files.

- W / T button : Select a number of prints

[Cancel] : Cancel the print setup.

4.Press the OK button to confirm the setting.

If an image carries DPOF instructions, the DPOF indicator () will show.

64