Samsung EC-M110ZSBB/FR Cable, Connect the supplied USB cable Case, Manager, Again, Beside them

Page 99

FAQ

Please check the following if the USB connection malfunctions.

Case 1	USB cable is not connected or it is not the supplied USB
	cable.

οConnect the supplied USB cable.

Case 2	The camera is not recognised by your PC. Sometimes, the
	camera may appear under [Unknown Devices] in Device
	Manager.

οInstall the camera driver correctly.

Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera.

Case 3	There is an unexpected error during ﬁle transfer.
	οTurn the camera power off and on again. Transfer the ﬁle
	again.

Case 4

When using the USB hub.

οThere may be a problem in connecting the camera to the PC through the USB hub if the PC and the hub are not compatible. Wherever possible, connect the camera to the PC directly.

Case 5

Are other USB cables connected to the PC?

οThe camera may malfunction when it is connected to the PC at the same time as another USB cable. In this case, disconnect the other USB cable, and connect only one USB cable to the camera.

Case 6	When I open the Device Manager (by clicking Start
	(Settings) Control Panel (Performance and Maintenance)
	System (Hardware) Device Manager), there are Unknown
	Devices or Other Devices entries with a yellow question
	mark(?) beside them or devices with an exclamation mark(!)
	beside them.

οRight-click on the entry with the question (?) or exclamation

(!) mark and select “Remove”. Restart the PC and connect the camera again. For Windows 98SE PC, remove the camera driver also, restart the PC, and then reinstall the camera driver.

Case 7	In some security programs (Norton Anti Virus, V3, etc.), the
	computer may not recognise the camera as a removable disk.
	οStop the security programs and connect the camera to the
	computer. Refer to the security program instructions about
	how to temporarily disable the program.
Case 8	The camera is connected to the USB port located on the
	front of the computer.
	ο When the camera is connected to the USB port located on
	the front of the computer, the computer may not recognise
	the camera. Connect the camera to the USB port located on
	the back of the computer.

98

Image 99

Contents Page Getting to Know your camera InstructionsPage Content Effect button Contrast Contrast control DpofContent System chart Included itemsOptional Items Identiﬁcation of features Mode dial Shutter button MicrophoneFront & Top Back Function button Battery holder Battery chamberFlash Self-timer BottomAuto Program Manual Self-timer lampMode icon Camera Status LampStill image Movie Connecting to a Power SourceConnecting to a Power Source „ How to charge the rechargeable battery SLB-10A „ Charging LED of the AC AdapterCharging LED Inserting the memory card Inserting the battery„ Insert the battery as shown BatteryMemory card is an electronic precision device Instructions on how to use the memory cardAbout Recorded Super Fine NormalWhen Using the Camera for the First Time Setting up the date, time and date typeSetting up the Language Description Icons LCD monitor indicator in recording modeTo insert the memory card. If the memory card is Starting the recording modeHow to use the Auto mode How to use the Program modeHow to use the Manual mode How to use the Dual is modeSelect the Dual is mode by rotating the Mode dial Pressing the Up/Down button Using the Photo Help Guide modeFunction that can be used when focusing is difﬁcult Pressing Menu button Pressing the Left Right buttonHow to use the Portrait mode How to use the Scene modesMode Icon Description How to use the Movie mode Pausing while recording a movie Successive RecordingRecording the movie without sound Pressing the shutter button down half way Things to Watch Out for When Taking PicturesZoom W / T button Setting up the recording function using the camera buttonsPower button Shutter buttonTele zoom Function Description / Info  / Up button Macro  / Down button„ Function description „ Types of focus mode and focus range W Wide, T Tele Auto  Program Selectable Focus lock Flash  / Left buttonNormal Macro Auto macro Icon Flash mode Description „ Available ﬂash mode, by recording mode Selectable Self-timer  / Right buttonMotion Icon & Self-timer lamp Icon ModeOISOptical Image Stabilization Menu / OK buttonColour  Effect button Captured images will be stored in black and white Effect button ColourColor  No effect is added to the imageSaved. Take a picture pressing the Shutter button Effect button Sharpness Effect button SaturationEffect button Contrast ButtonFn button How to use the Fn menuThis menu is only available in the Children scene mode  Press the Fn button in an available modeStill Icon Mode Still Image mode Movie modeSize Quality / Frame rateMetering Drive modeIcon Description White balanceShutter button Exposure compensationHow to use the menu Setting up the recording function using the LCD monitorSubject Focus AreaFocus frame turns green.Total CameraFor self-portraits, point the camera „ Self PortraitPressing the Up/Down button MonitorMulti AF „ Multi AFUp/Down button Points as shownAvailable recording time max10 hour Voice Memo Voice RecordingPress the shutter button and take a picture Press the shutter button onceRecording the movie without voice Scene modePausing while recording a voice Scene Mode MenuStarting play mode Playing back a moviePlaying back a still image Press the E button Movie capture function Playing back a recorded voiceName Press the Play / Pause button On/Off LCD monitor Indicator in play back modePlaying back a voice memo / Image Setting up the play back function using the camera buttonsThumbnail  / Enlargement  button EnlargementPress the MENU/OK button and a message will be displayed Info  / Up buttonImage size Maximum EnlargementPrinter  button By using the 5 function buttonPlay & Pause  / Down button Left / Right / Menu / OK buttonResize  menu tab Delete  buttonEffect button Resize This deletes images stored on the memory cardRotate  menu tab Effect button Rotating an imageSave the changed Press the play mode button and press the E buttonEffect button Image editing „ Custom colourBrightness control Contrast controlRed eye Removal Saturation controlSetting up the play back function using the LCD monitor Menu TabSub Menu Multi slide show can start only in the Show menu Setting up the play back function using the LCD monitorMulti slide show  Start the multi slide showAt set intervals Selecting Images Conﬁgure multi slide show effectsYou can select image to view Are played backVoice memo Setting play intervalSetting Background Music Playback Deleting images Protecting imagesUp / Down / Left / Right Select an Image to printZoom W / T Button Select the number of prints Press the OK button to conﬁrm the setting „ Print size „ IndexZoom W / T Button Change the print Copied folder is displayed on the LCD monitor Copy To CardBefore inserting the memory card into the camera Names start from after the last stored ﬁle namePictBridge Press the Up / Down button to select the number of prints PictBridge Picture Selection PictBridge Print SettingYou can select images you want to print Menu will be displayedMode Menu Sub Menu Available mode PictBridge Reset Sound menuShutter sound Self Portrait Volume Beep SoundSound  Start up sound AF soundSetup menu SecLogo London, Cape Verde, Mid-Atlantic, Buenos Setting up the Date / Time / Date typeAires, Newfoundland, Caracas, La Paz Language sub menuStart up image Quick viewLCD brightness LCD save Formatting a memory InitialisationNo The memory will not be formatted Imprinting the recording date File nameSelecting Video out type Auto power offMovie output signal from the camera can be Ntsc or PAL „ Connecting to an external monitorYou can turn on and off the Auto Focus lamp Auto Focus lampSoftware Notes System RequirementsFor Windows For Macintosh About the software „ You can visit the Samsung web-site through the internet Setting up the application softwareMaster, the camera driver was set up successfully Turn on the computer. The camera Starting PC modeComputer are connected Displayed on the LCD monitorConnect the camera to your PC with the USB cable „ Connecting the camera to a PCPop-up menu will open. Click the Cut or Copy menu Double-click Removing the removable diskUsing the USB Driver for MAC Setting up the USB Driver for MACSamsung Master Adjust You can modify image quality. See the Help menu Add Media Edit ClipSaturation Windows media asf ﬁle typesSpeciﬁcations Interface StorageButton Image PlayOperating Humidity Dimensions WxHxDWeight Operating TemperatureAreas with high explosives or highly ﬂammable materials Important notesDo not attempt to disassemble or modify the camera Extremes in temperature may cause problemsCard Locked Card ErrorFile Error Low BatteryBefore contacting a service centre Images don’t play back ﬂash does not ﬁreIncorrect date and time is displayed Camera buttons do not operateConnect the supplied USB cable Case Install the camera driver correctlyHow to temporarily disable the program CableSamsung Eco-mark When the movie doesn’t play back on the PCCorrect Disposal of This Product Insert the CD provided with the camera„ Note Correct disposal of batteries in this product101

Related manuals

Manual 103 pages 12.58 Kb

Manual 103 pages 27.4 Kb

Manual 106 pages 49.23 Kb

Manual 103 pages 38.63 Kb

Manual 50 pages 11.91 Kb

Manual 114 pages 53.09 Kb

Manual 98 pages 24.41 Kb

Manual 162 pages 44.45 Kb

Manual 114 pages 17.98 Kb

Manual 103 pages 63.39 Kb

Manual 103 pages 43.17 Kb

Manual 103 pages 50.12 Kb

Manual 103 pages 54.51 Kb

Manual 103 pages 56.07 Kb

Manual 103 pages 30.71 Kb