PictBridge : Picture Selection
If the [USB] menu is set to the [Computer], you cannot connect a Pictbridge compatible printer to the camera through USB cable with [Connecting Computer] message. By pressing the Printer button, at this point, you can connect the easy printing mode with [Connecting Printer] message. In some instances the camera may not connect to the printer, this will depend on the make of the printer.
Setting the Number of Copies to Print
-Select [One Pic] or [All Pics]. A screen where you can set the number of copies to print will appear as shown below.
0 |
0
Easy printing
When you connect the camera to printer in the Play back mode, you can print a picture easily.
- Pressing the Printer ( | ) button : |
The currently displayed image will be printed with | |
the printer’s default setting. | |
| PREV | NEXT | |
|
|
| |
| Exit:Shutter | Set:OK |
|
|
|
|
|
[When [One Pic] is selected] | |||
Exit:ShutterSet:OK
[When [All Pics] is selected]
- Pressing the Left/ Right button : |
Selects a previous/ next image. |
Menu:Ok
- Press the Up/ Down button to select the number of prints. |
- When [One Pic] is selected : Use the Left/ Right button to select another |
picture. After selecting another picture, select the |
number of prints for another picture. |
Select pictures to print
1. Press the Menu button.
2. The [Images] menu will appear.IMAGES
3. Use the UP and DOWN buttons to select the desired submenu value, and then press the OK button.
- After setting the number of prints, press the OK button to save. |
- Press the Shutter button to return to the menu without setting the number |
of prints. |
When [One Pic] is selected :
The PictBridge function will be applied only to the picture currently displayed.
When [All Pics] is selected :
Move:
AUTO SET
1. Use the LEFT and RIGHT buttons to select the |
[AUTO SET] menu tab. |
2. Use the UP and DOWN buttons to select the |
AUTO SET |
No |
Yes |
The PictBridge function will be applied to all pictures, excluding movie clips and voice files.
desired submenu value, and then press the OK |
button.
[No] : [CUSTOM SET] values are kept.
[Yes] : All values in the [CUSTOM SET] are automatically changed.
Exit:MENU | Move: |
50