Digimax Reader
4.Select the image you want to save as a text file.
*Only an image that was taken with a SAMSUNG camera can be opened.
5.Click the Area Analysis ( 
) icon to scan the image.
6.Part of the image you selected will be displayed as shown.
7.Click the Character Recognition ( 
) icon. The part selected in the previous step will be
recognized as text.
8.To save the section as a text,
click the Save ( 
) icon. A window as shown alongside will be displayed.
9.Select the file type that you want.
Selectable file types : *.TXT,*.HWP,*.DOC,*.RTF
INFORMATION
To get an image that can be recognised as a text :
-Choose a distance at which the text can be clearly focused.
-The subject needs to be centered.
-Seek to avoid camera shake to get a good image.
Refer to the [Help] menu in Digimax Reader for further information. Digimax Reader only recognises Korean, English and Russian. When this program scan texts that don't be printed on the keyboard, the extraction rate may be down.
FAQ
Please check the following if the USB connection malfunctions.
Case 1 The USB cable is not connected or you are using a cable with an incorrect specification.
Use a USB cable with the correct specification.
Case 2 The camera is not recognized by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager.
Install the camera driver correctly. Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera.
Case 3 There is an unexpected error during file transfer
Turn the camera power off and on again. Transfer the file again.
85