Selecting Video out type
Quick view
The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support
| SETUP |
Sound | NTSC |
USB | PAL |
AF Lamp |
|
If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images.
only BDGHI.
LCD |
|
Video Out |
|
Back: | Set:OK |
[Off] : The quick view function can’t be activated.
[0.5, 1, 3sec] : The captured image is briefly
| SETUP |
USB | off |
AF Lamp | 0.5 sec |
Connecting to an external monitor
displayed during the selected time.
LCD | 1 sec |
Video Out | 3 sec |
Quick View |
|
|
|
Back: | Set:OK |
[Using the AV cable with Cradle]
Yellow - Video
[Using the AV cable with Camera] | White - sound |
Initialisation
All camera menu and function settings will be restored to their default values. However, values for DATE/TIME, LANGUAGE, and VIDEO OUT will not be changed.
INFORMATION
NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, Thailand, Norway.
When using a TV as an external monitor, you will need to select the external or AV channel of the TV.
There will be a digital noise on the external monitor, but it is not a malfunction. If the image is not in the centre of the screen, use the TV controls to centre it. The menu functions are the same as those indicated on the LCD monitor.
If [No] is selected :
Settings will not be restored to their defaults. If [Yes] is selected :
All settings will be restored to their defaults.
| SETUP |
AF Lamp | No |
LCD | Yes |
Video Out |
|
Quick View |
|
Reset |
|
Back: | Set:OK |
57