Samsung DVD-CM500H/XEF manual Selecting the Colour Mode, OK or ❿, until, Conditions

Page 24

VCR

Selecting the Colour Mode

	Language	: English
	Install
GB	User Set
GB	Auto Power Off	: Off
	Screen Messages	: On

User Set

Colour System	: Auto
NICAM	: On
IPC	: On
ShowView Extend	: Off

Auto

PAL MESECAM B/W

Before recording or playing back a cassette, you can select the required system standard.

Otherwise, the system automatically selects the reception standard when you select AUTO.

➢◆ When playing back a cassette, the standard is automatically selected by the DVD-VCR.

◆When you playback an NTSC-recorded tape on this DVD- VCR make a setting on the colour system according to your TV. If your TV is a PAL system only TV, set NTPB. If your TV is Multi System TV (NTSC 4.43 compatible), set NT4.43 and you can record NT4.43.

1After pressing the MENU, press the OK or ❿ . Result: The Setup menu is displayed.

2	Press the corresponding ,❷ buttons to select the
	User Set option.

3Press the OK or ❿ to select this option.

Result: The User Set menu is displayed.

4	Press the corresponding or ❷ buttons, until the Colour
	System option is selected.

5Press the OK or ❿ button to select Auto➝PAL➝MESECAM➝B/W.

Auto When playing back a cassette, the system standard is automatically selected by the DVD-VCR.

B/W Black and White

6On completion, press RETURN three time to exit the menu.

VCR

NICAM

Language : English

Install

User Set

Auto Power Off	: Off
Screen Messages	: On

User Set

Colour System	: Auto
NICAM	: On
IPC	: On
ShowView Extend	: Off

24

NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound. Please refer to page 37.

1After pressing the MENU, press the OK or ❿ . Result: The Setup menu is displayed.

2	Press the corresponding ,❷ buttons to select the
	User Set option.

3Press the OK or ❿ to select this option.

Result: The User Set menu is displayed.

	4	Press the corresponding			or ❷ buttons, until the NICAM
		options selected.
On	5	To...		Press	OK or ❿, until...
Off
Off		Mono mode		Off is displayed.
		Mono mode		Off is displayed.
				Off: Only set at this position to record
				the standard mono sound during a
				NICAM broadcast if the stereo sound is
				distorted due to inferior reception
				conditions.

		NICAM mode		On is displayed.
				On: Normally set at this position.

6On completion, press RETURN three times to exit the menu.

Image 24

Contents DVD-CM500 GB Contents Playing Back Symbols Safety Instructions Following illustrations represent precautionsDisc Type and Characteristics Disc MarkingsPlayback Region Number Front View of the DVD-VCR Rear View of the DVD-VCRInfrared Remote Control ShuttlePROG/TRK 33 UP 34 OKDisplay Indicators AccessoriesCopy mode indicator Deciding How to Connect DVD-VCR Your DVD-VCR is equipped with the following connectorsConnector Location Type Recommended UseConnecting DVD-VCR to the TV using the Coaxial Cable Connecting DVD-VCR to the TV using the Scart CableAV1EURO AV By means of 21-pin Scart Cable By means of RF Coaxial CableAV2 in By means of 21-pin Scart Cable Plug & Auto Set up Tuning Your Television for the DVD-VCR Deck Control Keys STANDBY/ON ButtonDVD Button VCR ButtonInserting Batteries in the Remote Control Find that the remote control is no longer working correctlyBasic TV Tuner Operations Copying from DVD to VCR Insert VHS TapeInsert a blank VHS videotape into the VCR deck Copy the DVD to VHS TapeSetting the Date and Time Setting the Menu LanguageOpen Menu Select LanguagePresetting the Stations Automatically VCRPresetting the Stations Manually 13 To...ThenIf you Then Picture, if necessaryClearing a Preset Station Press the OK or ❿ to select a Manual Setup optionPress the corresponding Or ❷ buttons, until the Manual Result The TV Station Table menu is displayedChanging the Preset Station Table Television screenSelecting the RF OUT Sound Mode B/G-D/K Setting the DVD-VCR Output ChannelSelecting the Colour Mode OK or ❿, untilDistorted due to inferior reception ConditionsIntelligent Picture Control Auto Power Off ShowView ExtendPress the corresponding or ❷ buttons, until Off 1Hour 2Hour 3HourScreen Messages Selecting the Cassette TypePress OK or ❿, until E180 E240 300 E260Repeat Play VHS PlayDVD-VCR allows you to playback high quality S-VHS tapes Selecting the Recording Speed VCR Protecting a Recorded Cassette VCR Recording a Programme ImmediatelyIf you wish to cancel the recording before the end, press Recording a Programme with Automatic StopVCR Using the ShowView PressingModifying ShowView Programming If you wish to ThenSelect the recording speed Using the Timer Programming Feature PresetInsert the cassette and press Timer on the remote control Press the OK or ❿ button to select Standard optionChecking a Preset Recording Cancelling a Preset RecordingAdjusting Picture Alignment Manually Playing a CassetteThen press Selecting the Audio Output Mode Playing a Cassette in Slow MotionOption Description You can play a cassette in slow motionPlaying a Sequence at Variable Speeds Searching for a Specific Sequence PrevNext SeqIntro Scan Buttons, until the Intro Scan option is selectedUsing the Tape Counter VCR Connecting an RCA Audio/Video Input Cable Recoding from Another VCR or Camcorder Audio Dubbing a Pre-recorded Cassette CD, DVDUsing the TV Buttons on the Remote Control Brand CodesButton Function Choosing a Connection Connection to an TelevisionJack Setting Up the Language Features Using the Disc Menu LanguageUsing the Audio Language Using the Subtitle LanguagePress the ,❷ buttons to select ‘English’ Setting Up the Audio Options Setting Up the Parental Control About the Change Password❿ button About the Rating LevelSetting Up the Display Options Sends Component Interlace signal fromVideo Connections for DVD Connect S-Video Out to TVDVD Component Connections for DVD To Component Input on Your TVSpecial Playback Features Adjusting the Aspect Ratio EZ View To play back using aspect ratio DVDIf you are using a 169 TV For 169 aspect ratio discs For 43 aspect ratio discsIf you are using a 43 TV Displays the content of the DVD title in 43 aspect ratioFor 169 aspect ratio discs Letter Box Pan ScanUsing the Display Function DVD/VCD/CD When Playing a DVDUsing the Angle button Using the Subtitle buttonChanging the Camera Angle Selecting the Subtitle LanguageUsing the Zoom DVD/VCD DVD Repeat PlayRepeat Chapter/Title Selecting the Audio LanguageDVD Using the Mark Function DVD/VCD Using the Mark Function DVDRecalling a Marked Scene Clearing a MarkMP3-CD Playback List of albums in the folder will appearTo view the next album, press the Return button Select the track, and then press the OK button. PlaybackWMA Play WMA Disc PlaybackMP3/WMA Play Your MP3 or WMA files should be ISO 9660 or Joliet formatDo not try recording copyright protected MP3 files Program Play & Random Play Then press the OK buttonPicture CD Playback Thumbnail screenCD-R Jpeg Discs Setting the Delay Time Setting the Center SpeakerSetting the Surround Speakers Distance of a m Setting ms Distance of B mAbout Speaker Setup Center SpeakerSurround Speakers Front SpeakersTo Set the Speaker Balance To Test the SpeakersTo Set the Bass/Treble Sound Mode Function Sound ModeDolby Pro Logic Automatic Tuning Press and hold l or ❿❿l to begin automatic tuningListening to the Radio Tune in to the desired stationPresetting Stations Technical Specifications InputOutput Problems and Solutions VCR Check the TV/VCR aerial connectionsTroubleshooting Guide DVD Before requesting service troubleshootingProblem Action Ellas Greece Fourlis Trade A.E.B.E Electronics

Related manuals

Manual 41 pages 44.57 Kb

Manual 2 pages 20.88 Kb