Samsung DVD-CM500H/XEF To Set the Speaker Balance, To Test the Speakers, To Set the Bass/Treble

About Speaker Setup

To Set the Speaker Balance

1Press the SPEAKER button.

Each time you press the button, the selection will change as

follows: FL C FR SR SL SU VOL.

2Press AMP VOL + and AMP VOL - buttons to adjust the speaker volume.

The volume can be adjusted to a level between –10 and +10.

1

2

GB

2

To Test the Speakers

1In Stop mode, press the TEST button.

◆ The test tone will be output to the speakers in the following

order: FL (Front Speaker/L)		C (Center Speaker)		FR (Front
Speaker/R)	SR (Surround Speaker/R)		SL (Surround
Speaker/L)	SU (Subwoofer).

◆A hissing sound from a speaker indicates that the speaker is installed correctly.

2To end the speaker test, press the TEST button again.

➢• While the test tone is being produced, you can use the VOL buttons to set the speaker balance for the selected channel.

•While the subwoofer is being tested, a low bass sound of 100Hz or 125Hz will be heard.

To Set the Bass/Treble

1Press the BASS or TREBLE button.

Each time you press the BASS or TREBLE button, the corresponding setting will turn on or off.

2Use AMP VOL + and AMP VOL - buttons to adjust the bass or treble of the speakers.

The bass or treble can be adjusted to a level between –10 and +10.

1,2

FL	C	FR
FRONT SPEAKER	CENTER SPEAKER	FRONT SPEAKER
LEFT	SUB	RIGHT
	WOOFER
SL	SUB WOOFER	SR
	SPEAKER
SURROUND SPEAKER		SURROUND SPEAKER
LEFT		RIGHT

1

1

2

2

69