Samsung DVD-CM500H/XEF VCR Protecting a Recorded Cassette, VCR Recording a Programme Immediately

Page 30

VCR Protecting a Recorded Cassette

GB

1

Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot record on the tape.

1If you wish to protect a cassette, break off the tab using a small screwdriver.

2To re-record over a protected cassette (safety tab broken), cover the hole with adhesive tape.

VCR Recording a Programme Immediately

6

4

4

5

7

Before recording a programme, you must have preset the corres- ponding station (unless you are recording via an external video source). If you have not done so, refer to pages 19 and 20.

1Switch on the television.

2To monitor the programme being recorded, select the television channel reserved for use with your DVD-VCR (or the AV input if used).

3Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape.

Result: The DVD-VCR is switched on automatically.

4Select:

◆The station to be recorded using the PROG ( or ) buttons or

◆The AV1, AV2 or AUX source using the INPUT SEL. button for a satellite tuner or external video source

Result: The station number is displayed and the programme can be seen on the television.

5Select the recording speed by pressing the SPEED button as many times as required (see page 29).

6Hold REC ( ●) down for a while to start recording.

Result: The record indicator appears on the television and DVD-VCR display. An index is recorded on the tape (see page 39).

7To stop recording, press ■ once.

➢◆ If your DVD-VCR ejects the cassette when you start recording, check to make sure that the cassette’s safety tab is intact or that the opening (created by a broken safety tab) is covered with adhesive tape.

◆If you reach the end of the tape while recording, the cassette rewinds automatically.

30

Image 30

Contents DVD-CM500 GB Contents Playing Back Symbols Safety Instructions Following illustrations represent precautionsDisc Type and Characteristics Disc MarkingsPlayback Region Number Front View of the DVD-VCR Rear View of the DVD-VCRPROG/TRK Infrared Remote ControlShuttle 33 UP 34 OKDisplay Indicators AccessoriesCopy mode indicator Connector Location Type Deciding How to Connect DVD-VCRYour DVD-VCR is equipped with the following connectors Recommended UseConnecting DVD-VCR to the TV using the Coaxial Cable Connecting DVD-VCR to the TV using the Scart CableAV1EURO AV By means of 21-pin Scart Cable By means of RF Coaxial CableAV2 in By means of 21-pin Scart Cable Plug & Auto Set up Tuning Your Television for the DVD-VCR DVD Button Deck Control KeysSTANDBY/ON Button VCR ButtonInserting Batteries in the Remote Control Find that the remote control is no longer working correctlyBasic TV Tuner Operations Insert a blank VHS videotape into the VCR deck Copying from DVD to VCRInsert VHS Tape Copy the DVD to VHS TapeOpen Menu Setting the Date and TimeSetting the Menu Language Select LanguagePresetting the Stations Automatically VCRIf you Then Presetting the Stations Manually13 To...Then Picture, if necessaryPress the corresponding Or ❷ buttons, until the Manual Clearing a Preset StationPress the OK or ❿ to select a Manual Setup option Result The TV Station Table menu is displayedChanging the Preset Station Table Television screenSelecting the RF OUT Sound Mode B/G-D/K Setting the DVD-VCR Output ChannelDistorted due to inferior reception Selecting the Colour ModeOK or ❿, until ConditionsIntelligent Picture Control Press the corresponding or ❷ buttons, until Auto Power OffShowView Extend Off 1Hour 2Hour 3HourPress OK or ❿, until Screen MessagesSelecting the Cassette Type E180 E240 300 E260Repeat Play VHS PlayDVD-VCR allows you to playback high quality S-VHS tapes Selecting the Recording Speed VCR Protecting a Recorded Cassette VCR Recording a Programme ImmediatelyIf you wish to cancel the recording before the end, press Recording a Programme with Automatic StopVCR Using the ShowView PressingModifying ShowView Programming If you wish to ThenSelect the recording speed Insert the cassette and press Timer on the remote control Using the Timer Programming FeaturePreset Press the OK or ❿ button to select Standard optionChecking a Preset Recording Cancelling a Preset RecordingAdjusting Picture Alignment Manually Playing a CassetteThen press Option Description Selecting the Audio Output ModePlaying a Cassette in Slow Motion You can play a cassette in slow motionPlaying a Sequence at Variable Speeds Next Searching for a Specific SequencePrev SeqIntro Scan Buttons, until the Intro Scan option is selectedUsing the Tape Counter VCR Connecting an RCA Audio/Video Input Cable Recoding from Another VCR or Camcorder Audio Dubbing a Pre-recorded Cassette CD, DVDUsing the TV Buttons on the Remote Control Brand CodesButton Function Choosing a Connection Connection to an TelevisionJack Setting Up the Language Features Using the Disc Menu LanguageUsing the Audio Language Using the Subtitle LanguagePress the ,❷ buttons to select ‘English’ Setting Up the Audio Options ❿ button Setting Up the Parental ControlAbout the Change Password About the Rating LevelVideo Connections for DVD Setting Up the Display OptionsSends Component Interlace signal from Connect S-Video Out to TVDVD Component Connections for DVD To Component Input on Your TVSpecial Playback Features If you are using a 169 TV For 169 aspect ratio discs Adjusting the Aspect Ratio EZ ViewTo play back using aspect ratio DVD For 43 aspect ratio discsFor 169 aspect ratio discs Letter Box If you are using a 43 TVDisplays the content of the DVD title in 43 aspect ratio Pan ScanUsing the Display Function DVD/VCD/CD When Playing a DVDChanging the Camera Angle Using the Angle buttonUsing the Subtitle button Selecting the Subtitle LanguageUsing the Zoom DVD/VCD DVD Repeat PlayRepeat Chapter/Title Selecting the Audio LanguageRecalling a Marked Scene DVD Using the Mark Function DVD/VCDUsing the Mark Function DVD Clearing a MarkTo view the next album, press the Return button MP3-CD PlaybackList of albums in the folder will appear Select the track, and then press the OK button. PlaybackWMA Play WMA Disc PlaybackMP3/WMA Play Your MP3 or WMA files should be ISO 9660 or Joliet formatDo not try recording copyright protected MP3 files Program Play & Random Play Then press the OK buttonPicture CD Playback Thumbnail screenCD-R Jpeg Discs Setting the Surround Speakers Setting the Delay TimeSetting the Center Speaker Distance of a m Setting ms Distance of B mSurround Speakers About Speaker SetupCenter Speaker Front SpeakersTo Set the Speaker Balance To Test the SpeakersTo Set the Bass/Treble Sound Mode Function Sound ModeDolby Pro Logic Listening to the Radio Automatic TuningPress and hold l or ❿❿l to begin automatic tuning Tune in to the desired stationPresetting Stations Technical Specifications InputOutput Problems and Solutions VCR Check the TV/VCR aerial connectionsTroubleshooting Guide DVD Before requesting service troubleshootingProblem Action Ellas Greece Fourlis Trade A.E.B.E Electronics

Related manuals

Manual 41 pages 44.57 Kb

Manual 2 pages 20.88 Kb