Samsung DVD-CM500H/XEF manual Recording a Programme with Automatic Stop

Page 31

Recording a Programme with Automatic Stop

VCR

This function enables you to record up to nine hours (LP) of programmes.

Your DVD-VCR stops automatically after the requested length of time.

1Switch on the television.

2To monitor the programme being recorded, select the television channel reserved for use with your DVD-VCR (or the AV input if used).

3Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape.

Result: The DVD-VCR is switched on automatically.

4Select:

◆The station to be recorded using the PROG ( or ) buttons or

◆The AV1, AV2 or AUX source using the INPUT SEL. button for a satellite tuner or external video source

Result: The channel number is displayed and the

programme can be seen on the television.

5Select the recording speed by pressing the SPEED button as many times as required (see page 29).

6Hold the REC ( ●) button down for a while to start recording. Result: The record indicator appears on the television screen

and DVD-VCR display. An index is recorded on the tape (see page 39).

7Press the REC ( ●) button several times to increase the recording time in:

◆30-minute intervals up to four hours

◆1-hour intervals up to nine hours

Result: The length is displayed on the television displays. The selected programme is recorded for the length of time requested. At the end of that time, the DVD- VCR stops recording automatically and power off.

8If you wish to cancel the recording before the end, press

STANDBY/ON.

☛If the end of the tape is reached while recording: ◆ The recording stops and power off.

GB

3

4

4

6

5

LENGTH 2:30

SET LENGTH :

PRESS REC ●

☛This function is not available in DVD recording

31

Image 31

Contents DVD-CM500 GB Contents Playing Back Symbols Following illustrations represent precautions Safety InstructionsDisc Markings Disc Type and CharacteristicsPlayback Region Number Rear View of the DVD-VCR Front View of the DVD-VCR33 UP 34 OK Infrared Remote ControlShuttle PROG/TRKAccessories Display IndicatorsCopy mode indicator Recommended Use Deciding How to Connect DVD-VCRYour DVD-VCR is equipped with the following connectors Connector Location TypeConnecting DVD-VCR to the TV using the Scart Cable Connecting DVD-VCR to the TV using the Coaxial CableBy means of RF Coaxial Cable AV1EURO AV By means of 21-pin Scart CableAV2 in By means of 21-pin Scart Cable Plug & Auto Set up Tuning Your Television for the DVD-VCR VCR Button Deck Control KeysSTANDBY/ON Button DVD ButtonFind that the remote control is no longer working correctly Inserting Batteries in the Remote ControlBasic TV Tuner Operations Copy the DVD to VHS Tape Copying from DVD to VCRInsert VHS Tape Insert a blank VHS videotape into the VCR deckSelect Language Setting the Date and TimeSetting the Menu Language Open MenuVCR Presetting the Stations AutomaticallyPicture, if necessary Presetting the Stations Manually13 To...Then If you ThenResult The TV Station Table menu is displayed Clearing a Preset StationPress the OK or ❿ to select a Manual Setup option Press the corresponding Or ❷ buttons, until the ManualTelevision screen Changing the Preset Station TableSetting the DVD-VCR Output Channel Selecting the RF OUT Sound Mode B/G-D/KConditions Selecting the Colour ModeOK or ❿, until Distorted due to inferior receptionIntelligent Picture Control Off 1Hour 2Hour 3Hour Auto Power OffShowView Extend Press the corresponding or ❷ buttons, untilE180 E240 300 E260 Screen MessagesSelecting the Cassette Type Press OK or ❿, untilVHS Play Repeat PlayDVD-VCR allows you to playback high quality S-VHS tapes Selecting the Recording Speed VCR Recording a Programme Immediately VCR Protecting a Recorded CassetteRecording a Programme with Automatic Stop If you wish to cancel the recording before the end, pressPressing VCR Using the ShowViewIf you wish to Then Modifying ShowView ProgrammingSelect the recording speed Press the OK or ❿ button to select Standard option Using the Timer Programming FeaturePreset Insert the cassette and press Timer on the remote controlCancelling a Preset Recording Checking a Preset RecordingPlaying a Cassette Adjusting Picture Alignment ManuallyThen press You can play a cassette in slow motion Selecting the Audio Output ModePlaying a Cassette in Slow Motion Option DescriptionPlaying a Sequence at Variable Speeds Seq Searching for a Specific SequencePrev NextButtons, until the Intro Scan option is selected Intro ScanUsing the Tape Counter VCR Connecting an RCA Audio/Video Input Cable Recoding from Another VCR or Camcorder CD, DVD Audio Dubbing a Pre-recorded CassetteBrand Codes Using the TV Buttons on the Remote ControlButton Function Connection to an Television Choosing a ConnectionJack Using the Disc Menu Language Setting Up the Language FeaturesUsing the Subtitle Language Using the Audio LanguagePress the ,❷ buttons to select ‘English’ Setting Up the Audio Options About the Rating Level Setting Up the Parental ControlAbout the Change Password ❿ buttonConnect S-Video Out to TV Setting Up the Display OptionsSends Component Interlace signal from Video Connections for DVDTo Component Input on Your TV DVD Component Connections for DVDSpecial Playback Features For 43 aspect ratio discs Adjusting the Aspect Ratio EZ ViewTo play back using aspect ratio DVD If you are using a 169 TV For 169 aspect ratio discsPan Scan If you are using a 43 TVDisplays the content of the DVD title in 43 aspect ratio For 169 aspect ratio discs Letter BoxWhen Playing a DVD Using the Display Function DVD/VCD/CDSelecting the Subtitle Language Using the Angle buttonUsing the Subtitle button Changing the Camera AngleDVD Repeat Play Using the Zoom DVD/VCDSelecting the Audio Language Repeat Chapter/TitleClearing a Mark DVD Using the Mark Function DVD/VCDUsing the Mark Function DVD Recalling a Marked SceneSelect the track, and then press the OK button. Playback MP3-CD PlaybackList of albums in the folder will appear To view the next album, press the Return buttonWMA Disc Playback WMA PlayYour MP3 or WMA files should be ISO 9660 or Joliet format MP3/WMA PlayDo not try recording copyright protected MP3 files Then press the OK button Program Play & Random PlayThumbnail screen Picture CD PlaybackCD-R Jpeg Discs Distance of a m Setting ms Distance of B m Setting the Delay TimeSetting the Center Speaker Setting the Surround SpeakersFront Speakers About Speaker SetupCenter Speaker Surround SpeakersTo Test the Speakers To Set the Speaker BalanceTo Set the Bass/Treble Sound Mode Sound Mode FunctionDolby Pro Logic Tune in to the desired station Automatic TuningPress and hold l or ❿❿l to begin automatic tuning Listening to the RadioPresetting Stations Input Technical SpecificationsOutput Check the TV/VCR aerial connections Problems and Solutions VCRBefore requesting service troubleshooting Troubleshooting Guide DVDProblem Action Ellas Greece Fourlis Trade A.E.B.E Electronics

Related manuals

Manual 41 pages 44.57 Kb

Manual 2 pages 20.88 Kb