Samsung BD-D8500/EN, BD-D8500/XN Network Status, SWLSamsung Wireless Link, Press the OK button

Setup

9.When done with each field, press the ► button to move successively to the next field. You can also use the other arrow buttons to move up, down, and back.

10.Enter the IP Address, Subnet Mask, and Gateway values.

11.Press the ▼ to go to DNS Mode.

12.Press the ▼ button to go to the first DNS entry field. Enter the numbers as above.

13.Press the OK button.

14.The Network Status screen appears. The product connects to the network after the network connection is verified.

WPS(PBC)

The easiest way to set up the wireless network connection is using the WPS(PBC) function or the One Foot Connection function.

If your wireless router has a WPS(PBC) button, follow these steps:

1.Press the ▲▼ buttons to select WPS(PBC).

Settings		Network Settings
Display
Audio Select a network connection type.
Channel	Wired
Network
System	Wireless	Connect to the wireless router easily by pressing the
Language(general)
Security	WPS(PBC)	WPS(PBC) button. Choose this if your wireless router
		supports push button configuration(PBC).
General	One Foot
Support	Connection	>Move "Enter 'Return

2.Press the ENTER button.

3.Press the WPS(PBC) button on your router within two minutes. Your product automatically acquires all the network settings values it needs and connects to your network.

4.The Network Status screen appears. The player connects to the network after the network connection is verified.

One Foot Connection

You can set up the wireless connection automatically if you have a Samsung Wireless Router which supports One Foot Connection. To connect using the One Foot Connection function, follow these steps:

1.Press the ▲▼ buttons to select One Foot Connection.

Settings		Network Settings
Display
Audio Select a network connection type.
Channel	Wired
Network
System	Wireless	Connect to the wireless network automatically if your
Language(general)
Security	WPS(PBC)	wireless router supports One Foot Connection. Select
General	One Foot	this connection type after placing the wireless router
		within 10 inches (25 cm) of product.
Support	Connection	>Move "Enter 'Return

2.Press the ENTER button.

3.Place the Samsung Wireless Router within 25 cm (10 inches) of your product to connect.

4.Wait until the connection is automatically established.

Network Status

Check whether a connection to the network and the Internet have been established.

Settings		Network Status
Display		MAC Address		XX:XX:XX:XX:XX:XX
Audio		IP Address		0.0.0.0
Channel	iptime	Subnet Mask		0.0.0.0
Network		Gateway		0.0.0.0
		DNS Server		0.0.0.0
System
Internet is connected successfully.
LanguageIf you have a problem using any Internet services, contact your Internet service
provider.
Security
General		IP Settings	Retry	OK
SupportNetwork Settings
		<Move "Enter 'Return

SWL(Samsung Wireless Link)

Mobile devices with Samsung Wireless Link capability can be connected to your network via this product.

•Off : Set Samsung Wireless Link off.

•On : Set Samsung Wireless Link On.

1.If you select On, press the ▲▼ buttons to select the Connect SWL, then press the ENTER button. Please follow the instruction on TV Screen.

✎NOTE✎

`` If this product turned off, the network connection using SWL will be disconnected.

48 English