Samsung HT-E330/XE manual Playing Media Files using, USB Host Feature, USB Function USB Recording

		USB Function				USB Recording
Playing Media Files using the			While playing CD-DA (Compact Disc Digital Audio)
			using the USB Recording function or listening to the FM
USB Host Feature			radio or receiving audio source from an external device,
			you can record the audio source in the USB memory.
You can enjoy media files such as pictures, movies			Ex) USB recording of CD-DA audio contents
and music saved on an MP3 player, USB memory			1.		Connect the USB device to your product.
stick or digital camera in high quality video with 5.1			2.		Insert the CD-DA disc into the CD tray.
channel sound by connecting the storage device to
			3.	Press the USB REC button on the remote control.
the USB port of the product.
					• To start recording the current track,
						press the USB REC button on the
						remote control while the system is
						playing a track or stopped temporarily.
					•	To record the entire CD, press and hold the
						USB REC button on the remote control.
						- "FULL RECORDING" appears on the display
						and recording starts.
			4.	Press the STOP (@) button to stop recording.
					•	When USB recording of a CD is completed,
1.		Connect the USB device to the USB port on the				you will find a new folder named
						“RECORDING” in the USB drive. The
		front panel of the product.				contents will be saved in the folder in the MP3
2.		Press the FUNCTION button to select USB.				format.
		• USB appears on the display screen and then			•	When USB recording of FM radio or AUX
		disappears.				source is completed, you will find a new folder
3. Press the _+ buttons to select Videos, Photos						named “TUNER RECORDING or AUX
						RECORDING” in the USB drive. The contents
		or Music.
						will be saved in the folder in the MP3 format.
		- Select a file to play.
			✎✎NOTE
Safe USB Removal				`` Do not disconnect the USB connection or the power cable
					during the USB Recording. Otherwise, it may cause damage
To prevent damage to the memory stored in the USB					to the data.
device, perform safe removal before disconnecting					To stop USB Recording, press the STOP button and
the USB cable.					disconnect the USB device after the system stops playing
•	Press the YELLOW(C) button.			``	the CD completely.
	- REMOVE will appear on the display.				If you disconnect the USB connection during the USB
•	Remove the USB cable.				Recording, the system will turn off and you will not be able
					to delete the recorded file.
✎✎NOTE				``
					If you connect the USB device to the system while it is
	``	To listen to your music files with 5.1 channel			playing a CD, the system stops temporarily and will play
					again.
		sound, you must set the Dolby Pro Logic II
				`` If the recording duration is less than 5 seconds, a recording
		mode to Matrix. (See page 27)
					file may not be created.
	``			``
		Remove the USB cable from the USB port			USB Recording works only if the USB device is formatted in
		slowly. Otherwise, it may cause damage to the		``	the FAT file system. (The NTFS file system is not supported.)
		USB port.			The audio signal will not be output during USB recording of
				``	the CD.
					When Speaker selection is set to TV Speaker, the USB

Recording function is not supported.

05 Advanced Functions

English 29