CONNECTIONS
●● Do not connect the power cord of this product or your TV to a wall outlet until all connections between components are complete.
●● Before moving or installing this product, be sure to turn off the power and disconnect the power cord.
CONNECTING TO A TV
●● Important: Before you begin, put the battery into the remote. See page 10 for instructions.
CONNECTING TO A TV USING A DIGITAL OPTICAL CABLE
Optical Cable (not supplied)
OPTICAL OUT | DIGITAL AUDIO IN |
| (OPTICAL) |
DIGITAL AUDIO IN (OPTICAL)
1.Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV with a digital optical cable (not supplied).
2. Press the | button on the right side of the Soundbar or the SOURCE button on the remote control to select |
the D.IN mode. |
|
++Auto Power Link
If you have connected the main unit to a TV with a digital optical cable (not supplied), you can set the Auto Power function ON to have the Soundbar turn on automatically when you turn the TV on.
1.Connect the Soundbar and a TV with a digital optical cable (not supplied).
2. Press the | button on the main unit’s right side or the SOURCE button on the remote control to select the |
D.IN mode. |
|
3.Press the button on the remote control for 5 seconds to turn Auto Power Link on or off.
●● Auto Power Link is set to ON by default.
●● Depending on the connected device, Auto Power Link may not function.
16