FUNCTIONS
SOFTWARE UPDATE
USB (5V 0.5A)
Micro USB to
USB adapter Cable (not supplied)
Storage Device
Samsung may offer updates for the Soundbar's system firmware in the future.
If an update is offered, you can update the firmware by connecting a storage device with the firmware update stored on it to the USB port on your Soundbar.
Note that if there are multiple update files, you must load them onto the storage device singly and use them to update the firmware one file at a time.
Please visit samsung.com or contact the Samsung call centre to receive more information about downloading update files.
UPDATING PROCEDURE
1.Connect a Micro USB to USB adapter cable with a male USB 2.0 Micro USB plug (Type B) on one end and a standard female 2.0 USB jack (Type A) on the other end to the micro USB jack on your Soundbar.
●● The Micro USB to USB adapter cable is sold separately. To purchase, contact a Samsung Service Centre or Samsung Customer Care.
2.Follow the steps below to download the product software:
Go to the Samsung website at (samsung.com/sec) search for the model name - select the customer support option (the option name is subject to change)
3.Save the downloaded software to a storage device and select "Extract Here" to unzip the folder.
4.Turn off the Soundbar and connect the storage device containing the software update to the female port on a Micro USB adapter cable.
5.Turn on the Soundbar. Within 3 minutes, UPDATE is displayed and updating begins.
6.After completion, the power of Soundbar turns off. In this state, press the p button on the remote control for 5 seconds.
●● This product has a DUAL BOOT function. If the firmware fails to update, you can update the firmware again.
26