Samsung SHR-5082P manual Things to consider when adding a hard disk, Setting the jumper, Slave

Page 13

[Checking HDD Data]

CAUTION Please, pay attention to Following information to minimize the chance of losing HDD data.

Remember that you should protect HDD from any impact or misuse as this may cause damaged.

The Manufacturer is not responsible for missing data or defects caused by the user’s mishandling.

Note: Adding Extra HDD. Check in advance that the HDD is compatible with the manufacturer’s DVR.

Examples that can cause loss of data or damage HDD.

Any outside Impact on the case which could happen whilst disassembling or setting up the DVR.

Power cut or incorrect shutdown whilst the DVR is operating.

Moving or causing any impact on the DVR during operation. Please, back up events as soon as possible to minimize disappointment should HDD data be lost.

Things to consider when adding a hard disk

When adding a hard disk, pay attention so that the cable doesn’t get caught between unsuitable places or the cable’s insulation is not damaged. (This may cause a malfunction or fire.)

When adding a hard disk, be careful not to have any injury by the pointed edges inside the product.

Pay attention not to lose screws or accessories.

If the screws or accessories are not put together, the product may malfunction or not properly operate.

If you contact the RTC battery while adding hard disks, the battery failure may happen. In this case, you will encounter failures when setting the time and operating DVR.

If you don’t connect fan power cables after adding hard disks, the fan failure message appears on the screen. This can cause operation failures because it raises the temperature inside your DVR.

Check the compatibility list of HDDs before installing additional HDDs. The list of the compatible devices with Samsung DVR can be obtained from your vendor.

Setting the jumper

The jumper setting method is illustrated on the surface of the purchased HDD.

Using SAMSUNG hard disk, the jumper setting

 

method is as follows:

02

 

HDD jumper for Primary Master and Primary

INSTALLATION

 

Slave.

 

Jumper setting for Secondary Master (DVD-RW)

 

and Secondary Slave.

 

How to add hard disks

Before starting this work, remove the power cord from the outlet.

1.Take out the screws on the left and right sides (5 spots for each side) and on the rear (1 spot).

2.Remove the cover from the product. (Slide the cover slightly backward, lift it upward and remove it.)

installation _09

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Real Time DVR WHAT’S Included with Your DVR Key features of your DVRSafety regulations Operating Temperature BatteryBefore start Standards ApprovalsContents Search and Play Controls on the DVR Introducing your real time DVRFast/Step Rewind Button Power LEDStop Button PLAY/PAUSE ButtonRear Rear Panel JacksUsing the Numeric Buttons Remote ControlChanging the Remote Control ID Checking Installation Environment InstallationHDD Addition Setting the jumper Things to consider when adding a hard diskHow to add hard disks SlaveScrewdriver Bracket Hddb HddaBRACKET-HDDB Connecting VIDEO, AUDIO, and Monitor Connecting the Network Connecting with other devicesConnecting to Internet through Ethernet 10/100BaseT Illustrations are described based on SHR-5162Connecting the Alarm INPUT/OUTPUT Connecting the USBConnecting to Internet through Adsl  5082 Alarm IN/OUT Ports  5162 Alarm IN/OUT PortsConnecting the RS-485 Device Live Live Screen ModeOperating the System Live screen iconsLive screen modes Selecting live screen mode Setting Audio ON/OFFAudio On/Off setting in full screen mode Audio On/Off setting in 16-split modeEvent Monitoring Freezing and ZoomingFreeze function Zoom functionSPOT-OUT Monitoring Fan Information Error occurs in the fan Refer to the manualDate/Time/Language Setup Menu setupBefore USE SystemPassword System Log Load Factory DefaultEvent Log System LogStorage Setup System Information and SetupRemote Control Device Export/Import the ConfigurationCamera Camera ConfigurationMonitoring Screen SetupPTZ Device Record Quality & Auto Deletion Record ModeEvent Record Duration Record Rate & Video SizeAlarm Detection Setup Event Record ModeMotion Detection Setup Schedule Video Loss Detection SetupRecord Schedule IP Settings Alarm Out ScheduleNetwork Transfer Protocol Settings Transfer Picture Settings Callback SettingsYou can configure the video size and quality for Transferring picturesPort configuration for connecting Smart Viewer Configuring Network Poor image problem in Smart Viewer Case of TCP transfer protocolTo configure the related settings BackupPTZ camera control PTZ Camera Control ModeBasic PTZ Operations Camera Menu Setup Preset SetupTo set a preset Other View Preset ViewSamsung PanREC Normal Recording RecordingRecord Schedule Calendar Search Search and playEvent Search To perform a calendar searchGO to First Search Date Time SearchTo perform an event search To perform a date/time searchGO to Last Search Backup SearchPlayback Go to Last Speed play  Playback mode Viewing still images  Audio playbackPC Specification Recommended Main FeaturesSmart Viewer IntroductionExecution This button is used for connecting to Callback Setup ModeThis screen shows the monitoring sites  Setup Item Selection buttons DVR Setup Save/Cancellation of Revised Information  Closing the setup windowUser Password For more details, see , Menu Setup Admin Password Camera Camera Configuration Only English is available for the title Retype it Recording  Monitoring Setup Schedule  For the network password, you can Network Password Network Viewer Setup You can set the language to be displayed on Smart Viewer Site Setup DVR List If you really want to modify the DVR, disconnect Smart Viewer, the following message appearsDVR and retry to modify it  Site ListTo edit the DVR, go to the DVR list VersionTo add a DVR to the site, select a DVR and click Add Password certification failure Smart Viewer Monitoring ModeConnection Failure Cases Upgrading the DVR softwareConnection Screen Mode Conversion ButtonTime Information Connection InformationEvent Log Display Window  Time Change When the date and time of the DVR are changedClick Log to activate the log display window  Black When Smart Viewer cannot be connected to a DVR Sequence Mode ButtonCamera Connection Indication Window Screen Split Selection ButtonsCallback Button Next ButtonFavorite Button Video Recording ButtonVideo Brightness/Contrast Control Button Audio Volume Control ButtonPTZ Camera Control Buttons  The other cameras do not support those functions Self Menu Setup of PTZ deviceSearch Mode Audio Volume, Video Brightness/ Contrast Buttons Remote ModeVideo Save Backup/Video Conversion/Print/Setup Calendar WindowViewer Setup File Converting AVI Location Print button Viewer Setup File Converting Jpeg LocationSetup Mode button File Conversion buttonTime Line Local ModeReload button Appendix Product SpecificationTrue Recording ips 0.938/1.875/3.75/7.5/15/30ips Video MPEG4True Recording ips 0.781/1.563/3.125/6.25/12.5/25i Triplex 16 split  15 Channel Live +1Channel PB  5082 Outline Drawings Outline Drawings 5162 Outline Drawings Classification Detailed Items Factory Setup Factory DefaultCH1 DNS  If you forget the password, you shall reset the DVR to Troubleshooting FAQ If all your efforts as above end up with nothing, check Works for the shop where you bought the product DVR has problem. DVR will not work in order to protect When you use DHCP/ADSLPPPoE for connection  Check if 3 Smart Viewer users are in connection with Make sure that the external storage device installed is  Make sure that the additional external HDD installedPreamble Open Source License Report on the ProductAppendix No Warranty Repair or Correction How to Apply These Terms to Your New ProgramsWe protect your rights with a two-step method You must cause the whole of the work to Appendix Executable Foundation How to Apply These Terms to Your New LibrariesLicense, or at your option any later version Loss of USE, DATA, or Profits or Business Interruption OpenSSL LicenseThis Software is Provided by Eric Young ‘‘AS IS’’
Related manuals
Manual 109 pages 10.2 Kb Manual 93 pages 55.17 Kb Manual 110 pages 33.37 Kb Manual 93 pages 11.68 Kb Manual 109 pages 55.15 Kb Manual 109 pages 35.53 Kb Manual 109 pages 6.1 Kb Manual 109 pages 23.77 Kb Manual 109 pages 51.1 Kb Manual 93 pages 42.03 Kb

SHR-5082P/XEG, SHR-5162P/XEG, SHR-5162P/XEC, SHR-5082P/XEC, SHR-5082P/XET specifications

Samsung has consistently made significant strides in video surveillance technology, and the SHR-5162P, SHR-5162P/XEF, SHR-5082P, and SHR-5082P/XEF series DVRs illustrate this commitment to quality and innovation. These models are designed to meet the growing demands of security and surveillance applications, making them suitable for both residential and commercial environments.

One of the main features that set these DVRs apart is their impressive recording capabilities. The SHR-5162P series supports up to 16 channels, allowing users to connect multiple cameras for comprehensive coverage. This model captures high-quality video at real-time recording rates up to 30 frames per second in 1080p resolution. The SHR-5082P series, on the other hand, supports up to 8 channels with similar recording specifications, making it suitable for smaller installations without compromising on video quality.

The innovative H.264 video compression technology utilized in these DVRs helps to significantly reduce the storage requirements while maintaining clear video quality. This feature is particularly useful when managing large amounts of video footage, ensuring users can store more data without necessitating extensive hard drive space.

In terms of storage, both the SHR-5162P and SHR-5082P series support multiple SATA hard drives, allowing for considerable storage capacities which can be expanded as needed. Moreover, the inclusion of a backup function provides peace of mind, as users can easily save important footage.

The user interface of these DVRs has been designed with simplicity in mind, featuring an intuitive menu that allows users to navigate through various settings easily. Remote access is another key feature, enabling users to monitor their premises using mobile devices or computers. The ability to view live feeds or playback recorded footage from anywhere enhances security management significantly.

Furthermore, these DVRs include advanced motion detection technology, which triggers recording only when movement is detected. This smart feature helps save storage space and makes reviewing footage more efficient.

The Samsung SHR series also showcases dual-streaming technology, supporting both high-quality recording and lower bandwidth streaming simultaneously. This ensures users can access video feeds quickly without compromising quality.

In conclusion, the Samsung SHR-5162P, SHR-5162P/XEF, SHR-5082P, and SHR-5082P/XEF DVR models provide a comprehensive solution for modern surveillance needs. With their robust features, advanced technology, and user-friendly interfaces, these systems are ideal for individuals and businesses looking to enhance their security measures.
Top Page Image Contents