Samsung SHR-5162P/XEG, SHR-5082P/XEG, SHR-5162P/XET Record Mode, Record Quality & Auto Deletion

Page 31

OSG Display

-Date: The date is displayed on the screen when it is set to On.

-Time: The time is displayed on the screen when it is set to On.

-Title: The camera name is displayed on the screen when it is set to On.

-Status: Recording and event information, Audio sign, and PTZ sign are displayed on the screen when it is set to On.

Spot Out Channel

This is used to monitor a specific channel by connecting a monitor to the SPOT jack on the rear of the product. When you are using two monitors, one monitor can be set for spot out monitoring. This provides two kinds of functions: Displaying the spot out channel only and auto sequencing of all channels.

-Auto sequence setup ranges from Ch 1 to Ch 16.

-In the auto sequence mode, channels are changed in turn.

-Duration period for auto sequence is the same as the one set in Camera Setup.

Spot Out Event Monitor

This is set for monitoring events from multiple channels.

-Off: The event monitoring does not operate in the Spot Out channel.

-3sec, 5sec, 10sec, 20sec, and 30sec: Sets the screen duration period in the Auto Sequence mode.

-Continuous: Once the event monitoring starts, the screen remains alive until you press the ALARM button.

Monitor Out

Video output methods can be selected from Composite, VGA, and Dual output modes. System restarts after changing the Video output methods.

-Composite video output: transfers the composite output signal.

-VGA video output: transfers VGA output signal.

-Dual video output: both the Composite and VGA video outputs are available to use.

PB Channel Position

You can designate the playback (PB) channel location in 9-split mode.

Right Down: The playback channel is displayed at the lower right side of the screen. Center: The playback channel is displayed in the center of the screen.

Multi Channel Seq.

You can set the Auto Sequence interval for split screens. Available intervals are 3, 5, 10, 20, and 30 seconds.

[Video Out]

CAUTION You may experience low display quality while the dual video output is in use. In this case, please switch it to the composite or VGA video output. VGA video output port is not available while the composite video output is set to use and vice versa.

If the MODE and ZOOM buttons are pressed and hold for 5 seconds, the system restarts while alarming beep sound. The LED blinks while restarting and the video output mode is changed. (Composite output VGA output).

VGA output: 640x480 (60Hz)

RECORD MODE

The detailed list for record mode settings is as follows:

MENU SETUP

 

 

 

System

 

 

 

Camera

 

 

 

Monitoring

 

 

 

Record Mode

Record Quality & Auto Deletion

Event Record

Record Rate & Video Size

 

Event Record Duration

 

Schedule

 

 

 

 

Backup

 

 

 

Network

 

 

 

Move/Control

Select

MENU

Exit

Record Quality & Auto Deletion

 

Record Quality & Auto Deletion

 

Cam

Normal

 

Event

Cam

Normal

Event

1

Level4

Level4

9

Level4

Level4

2

Level4

Level4

10

Level4

Level4

3

Level4

Level4

11

Level4

Level4

4

Level4

Level4

12

Level4

Level4

5

Level4

Level4

13

Level4

Level4

6

Level4

Level4

14

Level4

Level4

7

Level4

Level4

15

Level4

Level4

8

Level4

Level4

16

Level4

Level4

Auto Deletion:

 

 

 

 

 

Off

01

Day

 

 

OK

Cancel

05 MENU SETUP

menu setup _27

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Real Time DVR WHAT’S Included with Your DVR Key features of your DVRSafety regulations Standards Approvals BatteryOperating Temperature Before startContents Search and Play Controls on the DVR Introducing your real time DVRPLAY/PAUSE Button Power LEDFast/Step Rewind Button Stop ButtonRear Rear Panel JacksUsing the Numeric Buttons Remote ControlChanging the Remote Control ID Checking Installation Environment InstallationHDD Addition Slave Things to consider when adding a hard diskSetting the jumper How to add hard disksScrewdriver Bracket Hddb HddaBRACKET-HDDB Illustrations are described based on SHR-5162 Connecting with other devicesConnecting VIDEO, AUDIO, and Monitor Connecting the Network Connecting to Internet through Ethernet 10/100BaseT 5082 Alarm IN/OUT Ports  5162 Alarm IN/OUT Ports Connecting the USBConnecting the Alarm INPUT/OUTPUT Connecting to Internet through AdslConnecting the RS-485 Device Live screen icons Live Screen ModeLive Operating the SystemLive screen modes Audio On/Off setting in 16-split mode Setting Audio ON/OFFSelecting live screen mode Audio On/Off setting in full screen modeZoom function Freezing and ZoomingEvent Monitoring Freeze functionSPOT-OUT Monitoring Fan Information Error occurs in the fan Refer to the manualSystem Menu setupDate/Time/Language Setup Before USEPassword System Log Load Factory DefaultSystem Log Event LogStorage Setup System Information and Setup Remote Control Device Export/Import the ConfigurationCamera Camera ConfigurationMonitoring Screen SetupPTZ Device Record Quality & Auto Deletion Record ModeEvent Record Duration Record Rate & Video SizeAlarm Detection Setup Event Record ModeMotion Detection Setup Schedule Video Loss Detection SetupRecord Schedule IP Settings Alarm Out ScheduleNetwork Transfer Protocol Settings Transferring pictures Callback SettingsTransfer Picture Settings You can configure the video size and quality forCase of TCP transfer protocol Configuring NetworkPort configuration for connecting Smart Viewer  Poor image problem in Smart ViewerTo configure the related settings BackupPTZ camera control PTZ Camera Control ModeBasic PTZ Operations Camera Menu Setup Preset SetupTo set a preset Pan Preset ViewOther View SamsungREC Normal Recording RecordingRecord Schedule To perform a calendar search Search and playCalendar Search Event SearchTo perform a date/time search Date Time SearchGO to First Search To perform an event searchGo to Last Backup SearchGO to Last Search Playback Audio playback  Playback mode Speed play  Viewing still imagesIntroduction Main FeaturesPC Specification Recommended Smart ViewerExecution This button is used for connecting to Callback Setup ModeThis screen shows the monitoring sites  Closing the setup window DVR Setup Setup Item Selection buttons  Save/Cancellation of Revised InformationUser Password For more details, see , Menu Setup Admin PasswordRetype it Camera Configuration Camera  Only English is available for the title Recording  Monitoring Setup Schedule  For the network password, you can Network Password Network Viewer Setup You can set the language to be displayed on Smart Viewer Site Setup DVR List  Site List Smart Viewer, the following message appearsIf you really want to modify the DVR, disconnect DVR and retry to modify itTo edit the DVR, go to the DVR list VersionTo add a DVR to the site, select a DVR and click Add Upgrading the DVR software Monitoring ModePassword certification failure Smart Viewer Connection Failure CasesConnection Information Mode Conversion ButtonConnection Screen Time InformationEvent Log Display Window  Time Change When the date and time of the DVR are changedClick Log to activate the log display window Screen Split Selection Buttons Sequence Mode Button Black When Smart Viewer cannot be connected to a DVR Camera Connection Indication WindowVideo Recording Button Next ButtonCallback Button Favorite ButtonVideo Brightness/Contrast Control Button Audio Volume Control ButtonPTZ Camera Control Buttons  The other cameras do not support those functions Self Menu Setup of PTZ deviceSearch Mode Calendar Window Remote ModeAudio Volume, Video Brightness/ Contrast Buttons Video Save Backup/Video Conversion/Print/SetupFile Conversion button Viewer Setup File Converting Jpeg LocationViewer Setup File Converting AVI Location Print button Setup Mode buttonTime Line Local ModeReload button Appendix Product SpecificationTrue Recording ips 0.938/1.875/3.75/7.5/15/30ips Video MPEG4True Recording ips 0.781/1.563/3.125/6.25/12.5/25i Triplex 16 split  15 Channel Live +1Channel PB  5082 Outline Drawings Outline Drawings 5162 Outline Drawings Classification Detailed Items Factory Setup Factory DefaultCH1 DNS  If you forget the password, you shall reset the DVR to Troubleshooting FAQ If all your efforts as above end up with nothing, check  Check if 3 Smart Viewer users are in connection with DVR has problem. DVR will not work in order to protectWorks for the shop where you bought the product  When you use DHCP/ADSLPPPoE for connection Make sure that the external storage device installed is  Make sure that the additional external HDD installedPreamble Open Source License Report on the ProductAppendix No Warranty Repair or Correction How to Apply These Terms to Your New ProgramsWe protect your rights with a two-step method You must cause the whole of the work to Appendix Executable Foundation How to Apply These Terms to Your New LibrariesLicense, or at your option any later version Loss of USE, DATA, or Profits or Business Interruption OpenSSL LicenseThis Software is Provided by Eric Young ‘‘AS IS’’
Related manuals
Manual 109 pages 10.2 Kb Manual 93 pages 55.17 Kb Manual 110 pages 33.37 Kb Manual 93 pages 11.68 Kb Manual 109 pages 55.15 Kb Manual 109 pages 35.53 Kb Manual 109 pages 6.1 Kb Manual 109 pages 23.77 Kb Manual 109 pages 51.1 Kb Manual 93 pages 42.03 Kb
Top Page Image Contents