Turning a Timer Alarm
On or Off
To turn off the alarm so it does not sound again, press TIMER 1, TIMER 2, or TIMER 3. Then press C while 
TIMER
flashes.
If you want to turn on a timer alarm again, press TIMER 1, TIMER 2, or TIM-
ER 3. Then press ENTER 
while 
TIMER
and 1, 2, or 3 flash.
Timer Recording
You can connect a tape recorder to the receiver and have it record starting at a preset time.
Connect your tape recorder as de- scribed in “Connecting a Tape Re- corder” on Page 10 and set your tape recorder to record. Then follow the steps in “Using the Timer Alarms” on Page 32 to have the radio start to play at the time you want.
When the radio plays at the time you set, the tape recorder starts and records the broadcast.
USING THE SLEEP
TIMER
The sleep timer lets you set the re- ceiver to turn off in an amount of time you set.
1. With the receiver off, hold down POWER until the receiver beeps and turns on. 90 appears and 
flashes.
After a few seconds, 90 disap-
pears and 
stops flashing.
2. Tune to the desired station.
After the preset number of minutes, the receiver turns off. To turn off the re- ceiver sooner, press POWER.
To change the playing time after you set it, hold down POWER. The sleep timer changes from 90 → 80 → 70 → 60 → 50 → 40 → 30 → 20 → 10 → 90 minutes, repeating the sequence as you hold down POWER. Release POW- ER when the desired amount of time appears.
33