Radio Shack DX-398 Aircraft Frequencies, Ships and Coastal Station Frequencies, Longwave Band

Page 36
Aircraft Frequencies

Aircraft Frequencies

Aircraft on international routes some- times use SW. Most transmissions are in SSB, although you can still hear some MW transmissions. Here are some bands where you might hear air- craft communications.

4,650–4,750 kHz

6,545–6,765 kHz

8,815–9,040 kHz

11,175–11,400 kHz

13,200–13,360 kHz

15,010–15,100 kHz

17,900–18,030 kHz

Ships and Coastal Station Frequencies

Most transmissions from ships and coastal stations are in SSB and CW. You can hear these transmissions in the following bands.

2,000–2,300 kHz*

4,063–4,139 kHz

4,361–4,438 kHz

8,195–8,181 kHz

12,330–12,420 kHz

13,107–13,200 kHz

16,460–16,565 kHz

*The Coast Guard and small boats use this band, with 2,182 kHz set aside as the international distress and emer- gency channel.

Time Standard Frequencies

The following frequencies announce the exact time of day at specified inter- vals.

WWV in Fort Collins, Colorado:

2,500 kHz

5,000 kHz

10,000 kHz

15,000 kHz

20,000 kHz

CHU in Canada: 7,335 kHz

VNG in Australia: 4,500 and 12,000 kHz

Longwave Band

The 150–519 kHz range is known as the longwave band. Most stations in this range serve as beacons for aircraft and marine navigation by continuously transmitting their call letters. Recep- tion for this range is best between 6:00 PM and midnight (your time).

Some ships also use this range, with 500 kHz set aside as an international distress and emergency station.

Most stations in this range use CW (Morse code), although some use AM voice transmission for weather broad- casts.

36

Image 36
Contents OWNER’S MANUAL with Radio Data SystemAll-BandShortwave Receiver DX-398FEATURES Control Lock — prevents accidental setting changes THE FCC WANTS YOU TO KNOW Band MetersCONTENTS Storing FM, MW, or LW Frequencies in Memory CONNECTING TO POWER Installing Internal BatteriesUsing Standard AC Power PREPARATIONUsing Vehicle Battery Power ADJUSTING THE TELESCOPING ANTENNA CONNECTING AN EXTERNAL ANTENNACONNECTING HEADPHONES CONNECTING A TAPE RECORDERTraffic Safety Listening SafelyUSING THE STAND USING THE MEMO LABEL SETTING THE MW AM TUNING INCREMENTUNDERSTANDING YOUR RECEIVER C cancel — cancels an entry AM MODE — lets you set up the alarm timerTUNING / — tunes up or down the band you selected M/MEM — stores frequencies into memoryBASIC OPERATION TURNING THE RECEIVER ON AND OFFLIGHTING THE DISPLAY LOCKING THE CONTROLSSETTING AND VIEWING THE LOCAL TIME VIEWING A WORLD TIME CHANGING A WORLD CITY NAMETUNING STATIONS Manual TuningSelecting a Band Direct Access Tuning Scan TuningTUNING PREPROGRAMMED SHORTWAVE STATIONS PAGEDX-398SHORTWAVE PAGES CHART CountryMemory Location PageCountry Memory LocationPage StationsCountry Memory LocationPage StationADJUSTING THE TONE SPECIAL TUNING CONTROLSSTEREO/MONO-FM WIDE/NARR.-AMTUNING SSB STATIONS USING RDS5.If your time zone is using Daylight Follow these steps to use RDS1.Turn on the receiver Saving Time, repeatedly press until appearsMEMORY FUNCTIONS STORING FM, MW, OR LW FREQUENCIES IN MEMORYAutomatic Storage Manual StorageSTORING SW FREQUENCIES IN MEMORY 4.While PAGE and MEMO flash LOCKING/UNLOCKING A STORED STATION MOVING A FREQUENCY TO ANOTHER MEMORY LOCATIONDELETING A STATION YOU STORED USING PRIORITY TIMER FUNCTIONS USING THE TIMER ALARMSSetting an Alarm Silencing the AlarmUSING THE SLEEP TIMER Turning a Timer Alarm On or OffTimer Recording LISTENING HINTS REFERENCE SOURCESFREQUENCY CONVERSION BAND ALLOCATIONInternational Frequencies Aircraft Frequencies Ships and Coastal Station FrequenciesTime Standard Frequencies Longwave BandLISTENING GUIDE Station LocationRemarks 5,950Station LocationRemarks 9,610Station LocationRemarks 15,084BIRDIES AMATEUR SHORTWAVE BANDS IN THE USAmateur Shortwave Bands in MHz TROUBLESHOOTING CARE AND MAINTENANCE RESETTING THE DISPLAY SPECIFICATIONS Page Limited Ninety-DayWarranty We Service What We SellRadioShack A Division of Tandy Corporation