TUNING STATIONS
Note: “Special Tuning Controls” on Page 24 contains more information about using your receiver’s controls.
Selecting a Band
Press ATS/FM, ATS/LW, ATS/MW, or
METER/SW to select the band. (Press ATS/MW for AM.)
To select a smaller band within the SW band, press METER/SW again. When m flashes on the right side of the display, enter the desired band by pressing its labeled key on the keypad. For exam- ple, to select the 75 meter shortwave band, press 3.
Manual Tuning
You can select a lower or higher fre-
quency by pressing TUNING or
. The frequency changes in the fol- lowing increments.
Band | Tuning Increment |
|
|
FM | 0.1 MHz |
|
|
LW | 9 kHz |
|
|
MW | 9 or 10 kHz |
|
|
SW | 0.005 MHz |
|
|
You can also select a higher or lower frequency by turning MANUAL TUN- ING.
As you turn MANUAL TUNING, you might find that you need the frequen- cies to change more slowly. To change how quickly the frequencies change as you rotate the knob, re- peatedly press STEP on the front of the receiver so the arrow on the right side of the display points to FAST or SLOW.
18