Samsung VCC4580V32/XTR manual Troubleshooting, Cord rewind button, Low or decreasing suction

troubleshooting

PROBLEM	SOLUTION
Motor dows not start.	• Check cable, pulg and socket.
	• Leave to cool.
Suction force is gradually	• Check for blockage and remove.
decreasing.
Cord does not rewind fully.	• Pull the cord out 2-3m and push down the
	cord rewind button.
Vacuum cleaner dows not pick up	• Check hose and replace if required.
dirt.
	• Please check filter and, if required, clean as
Low or decreasing suction	illustrated in the instructions. if filters are out
	of condition change them to new ones.
Body overheating	• Please check filters, If required clean as
	illustrated in the instruction.
Static electicity discharge	• Please decrease power suction.

This Vacuum cleaner is approved the following.

EMC Directive : 2004/108/EEC

Low Voltage Directive : 2006/95/EC

14_ troubleshooting