Samsung VC07F50VN3Y/EG, VC15F50VN3Y/GE Using the UV Brush SC21F50U, SC15F50U, SC07F50U Series

Body-control type (SC21F50V, SC15F50V, SC07F50V Series)

--HOSE

To reduce suction for leaning draperies, small rugs, and other light fabrics, pull the tap air until the hole is open

--BODY

To control power level, just slide the power control up and down.

MIN = For delicate fabrics, e.g.net curtains.

MAX = For hard floors and heavily soiled carpets. MAX

MIN

USING THE UV BRUSH (SC21F50U, SC15F50U, SC07F50U SERIES)

1. Insert the brush into the hose handle.

• Insert the UV brush securely into the hose handle until you hear a “clicking” sound.

2. Press the [BRUSH ON/OFF] button to start cleaning.

• Press the [BRUSH ON/OFF] button and choose the appropriate suction strength for the cleaner.

• It is advisable to select the (Max) suction strength setting.

• UV sterilization cannot be activated by itself.

3. When you have finished UV cleaning, press the [ ] button.

• Press the [ ] button to stop the cleaner.

-- For safety reasons, UV brushing only runs for 30 minutes and then stops operating. To resume the operation, press the [SUCTION (-/+)] button again.

The UV brush, which is inserted into the hose handle (not directly connected to the telescopic CAUTION pipe), is dedicated for bedclothes.

10_ operating the cleaner