Samsung NQ50J3530BS/EO manual Information codes

Information codes

If the oven fails to operate, you may see an information code on the display. Check the table below and try the suggestions.

Code	Description	Action
C-20	The temperature sensor is open.
	The temperature sensor is short.	Unplug the power cord of
C-F0	If there is no communication between the	the oven, and contact a local
	main and sub MICOM.	Samsung service centre.
C-F1	Only occurs during EEPROM Read/Write.
	This code appears when the oven
	temperature high.	Unplug the power cord for
C-21	In case the temperature rises over the	cooling enough time, and
	limit temperature during operation of each	restart the microwave oven.
	mode. (Fire sensed.)
C-F2		Press Stop ( ) to try again.
		Unplug the power cord for
		cooling enough time, and
	The touch key is malfunction.	clean the button. (Dust,
C-d0		Water)
		When appear same problem,
		contact a local Samsung
		service centre.

Troubleshooting

English  69

NQ50J3530_EO_DE68-04356F-00_EN.indd 69 2015-04-13 �� 7:10:04