Remote controller display
| Operation mode | |
Turbo indicator | indicator | |
Low battery indicator | ||
Quiet indicator | ||
Transmit indicator | ||
Smart Saver indicator | ||
Air swing indicator | ||
| ||
| Fan speed indicator | |
On Timer indicator | Auto (Turbo) | |
Low | ||
Off Timer indicator | ||
Medium | ||
indicator | ||
High | ||
|
Battery changing time
When the battery is exhausted, (
) will be displayed in the remote controller display. When the icon appears, change the batteries. The remote controller requires two 1.5V AAA type batteries.
Storing the remote controller
When you do not use the remote controller for long time, remove the batteries from the remote controller and store it.
Inserting the batteries
02 BASIC FunCtIOn
1.Push the lever as arrow indicates on the rear side of the remote controller and pull up.
2.Insert two AAA batteries.
Check and match
3.Close the cover by place it back to its original position.
You should hear click sound when the cover is locked properly.
• The signal may not be received properly if electronic flourescent lamps such as inverter flourescent lamps are operating in the same space.
• If other electrical products operate by the remote controller, call your nearest contact center.
Correct disposal of batteries in this product
(Applicable in countries with separate collection systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.
If batteries are not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.
English-13
Maldives ET
2016/5/16 10:26:38