Operations
Control panel
09
02 | 08 |
10
01
03 04 05 06
07
Operations
01 Cycle Selector | Turn the dial to select a cycle. | ||
|
| ||
02 Display | The display shows current cycle information and estimated time | ||
remaining, or an information code when a problem occurs. | |||
| |||
|
| ||
| Press to change the water temperature for the current cycle. | ||
03 Temp. | Press and hold for 3 seconds to turn on/off the Drum Light. | ||
| The drum light turns off automatically after 2 minutes. | ||
|
| ||
04 Rinse | Press to change the rinse count for the current cycle. You can set | ||
the rinse count to a max of 5, depending on the cycle. | |||
| |||
|
| ||
| Press to change the spinning speed for the current cycle. | ||
| • | Rinse Hold: The final rinse process is suspended so that the | |
|
| laundry remains in the water. To unload the laundry, run a | |
|
| drain or spin process. | |
05 Spin | • | No Spin: The drum does not rotate after the final drain process. | |
• Spin Only: To run the Spin Only cycle, press Spin for 3 seconds. | |||
| |||
|
| When the cycle time and spinning speed appear, press Spin | |
|
| repeatedly until a desired spinning speed is selected. Then, | |
|
| press Start/Pause to start the cycle. The spinning time depends | |
|
| on the selected cycle. | |
|
| ||
06 Options | Press to enter the Options screen. | ||
|
| ||
| Press to turns on Smart Control. If Smart Control turns on, the | ||
07 Smart Control | washing machine can be controlled on a mobile device. | ||
| Press and hold for 3 seconds to enter the Settings screen. | ||
|
| ||
08 Navigation | Use to navigate through the menus or to adjust the value of the | ||
buttons | settings. | ||
|
| ||
09 Power | Press to turn on/off the washing machine. | ||
|
| ||
10 Start/Pause | Press to start or stop operation. | ||
|
|
| |
32 English