Samsung RF905QBLASL/ZA Setting up your refrigerator, Getting Ready to Install the Refrigerator

setting up your refrigerator

GETTING READY TO INSTALL THE REFRIGERATOR

Congratulations on your purchase of the Samsung Refrigerator. We hope you enjoy the state-of-art features and efficiencies that this new appliance offers.

Selecting the best location for the Refrigerator

•A location with easy access to the water supply.

•A location without direct exposure to sunlight.

•A location with level (or nearly level) flooring.

•A location with enough space for the Refrigerator doors to open easily.

•Allow sufficient space to the right, left, back and top for air circulation.

If the Refrigerator does not have enough space, the internal cooling system may not work properly.

•Please ensure that appliance can be moved freely in the event of maintenance & service.

•Do not install the refrigerator in locations where the temperature is over 43 °C (109 °F) or below 5 °C (41 °F).

B

A

E

C D

Depth “A”	908 mm
Width “B”	908 mm
Height “C”	1822 mm
Overall Height “D”	1850 mm

14_ setting up

50 mm
125°	125°
	305.5 mm
	1519 mm
	908 mm
mm	72.3 mm
	43 mm
785		mm
		1260

•Each measurement based on the design dimension, so it may differ depending on the measuring method.

When moving your refrigerator

To prevent floor damage be sure the front leveling legs are in the up position(above the floor).

Refer to “HOW TO LEVEL THE REFRIGERATOR” in the manual (at page 17).

FLOORING

For proper installation, this refrigerator must be placed on a level surface of hard material that is the same height as the rest of the flooring.

This surface should be strong enough to support a fully loaded refrigerator.

To protect the finish of the flooring, cut a large section of the cardboard carton and place under the refrigerator where you are working. When moving, be sure to pull the unit straight out and push back in straight.

DA68-02836A-06.indb 14 2016. 6. 25.

�� 8:51