+/ - button
■White balance : The white balance control allows you to adjust the colours to appear more natural.
●Selecting a White Balance
●Using the Custom White Balance
White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance.
1. Press the +/ - button, and then use the UP and |
|
|
|
|
|
|
|
|
| 6 |
| ||
DOWN buttons to select the white balance icon |
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| |||
( | ). The white balance menu bar will |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
| |||
appear as shown. |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
| ||
2. Use the LEFT and RIGHT buttons to set the |
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| |||
white balance to the desired value. The value |
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| |||
you set wil be displayed on the LCD monitor. |
|
| |||||||||||
AUTO | : The camera automatically selects the appropriate white | ||||||||||||
|
| balance settings, depending on the prevailing lighting |
|
| |||||||||
|
| conditions. |
|
| |||||||||
DAYLIGHT | : For taking images outside. |
|
| ||||||||||
CLOUDY | : For taking images under a cloudy and overcast sky. |
|
| ||||||||||
Fluorescent H | : For shooting under daylight fluorescent types of three- |
|
| ||||||||||
1.Select the CUSTOM ( 
) menu of the White Balance.
2.Place a sheet of white paper in front of the camera so that the LCD monitor shows only white, and then press the SHUTTER button.
3.Your custom white balance value is stored.
-The custom white balance value will be applied, starting with the next picture you take.
-The user configured white balance will be remain effective until it is overwritten.
6 |
Measure:Shutter |
| way fluorescent lighting. |
Fluorescent L | : Shooting under white fluorescent lighting. |
TUNGSTEN | : For shooting under tungsten (standard light bulb) lighting. |
CUSTOM | : Allows the user to set the white balance according to the |
| shooting condition. |
Different lighting conditions may cause a colour cast on your images.
3.Press the +/ - button again. The value you set will be saved and White Balance setup mode will end.
[White paper]
《33》