Starting play mode
■Movie clip capture function : capture still images from the movie clip.
■On camera movie trimming : You can extract desired frames of movie clip during the movie clip play back.
●How to capture the movie clip
Steps
4.Press the Play / Pause button while playing the movie clip. Then press the E button.
5.The paused movie clip is saved in a new file
name.
※The captured movie clip file has same size as the original movie clip (640X480, 320X240).
MARK IN:OK Capture:E
[Paused]
● If the running time is under 10 seconds, the movie |
clip can’t be trimmed. |
1. Press the Pause button at the point of the movie |
clip that you want to start extracting. |
2. Press the OK button. (The start point doesn't |
display on the status bar, but the start point will be |
marked.) |
3. The movie plays back again and the extracted |
range will be displayed on the status bar. |
4. Press the Play & Pause button once more at the |
point where you wish the extracted file to stop. |
5. Press the OK button and a confirmation window |
will display. |
MARK IN:OK Capture:E
Play: / | OK:Trim |
[Pressing the E button]
6. Select a desired sub menu by pressing the Left/ |
Right button and press the OK button. |
[Yes] : The extracted frames are saved as a new |
file name.
[No] : The movie trimming will cancel.
Trimming?
Yes No
Confirm : OK
INFORMATION
●If the time line bar passes by the start point by pressing the REW (Left) button, the first frame of the movie clip will display.
●If you don’t specify the ending point of the movie clip, the trimming confirmation window will display at the point of the last frame.