Quality/ Frame rate
■You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality.
Mode |
| STILL IMAGE mode |
| MOVIE CLIP mode | ||
|
|
|
|
|
|
|
Icon | TIFF |
|
|
|
|
|
|
|
|
|
|
|
|
Sub menu | TIFF | Super Fine | Fine | Normal | 30FPS | 15FPS |
|
|
|
|
|
|
|
File Format | tif | jpeg | jpeg | jpeg | avi | avi |
|
|
|
|
|
|
|
■You can select frame rate and take continuous images in the Motion capture mode.
-1S : takes 30 images for 1 second.
-2S : takes 30 images for 2 second.
-3S : takes 30 images for 3 second.
※Continuous images by using the Motion capture mode
TIME |
1S |
2S |
3S |
[Motion capture mode] |
QUALITY |
TIFF |
Super Fine |
Fine |
Normal |
[ STILL IMAGE mode ]
FRAME RATE |
30 FPS |
15 FPS |
[ MOVIE CLIP mode ]
Metering
INFORMATION
●The TIFF file can’t be rotated, resized and trimmed.
●The TIFF file format is for advanced users and provides the best quality. However, large file size reduces number of available pictures to take and increases saving time to the memory card.
●A [Processing!] message is displayed while saving a TIFF file to the memory card.
●The TIFF file format can't be selected in the Motion Capture mode.
●This file format complies with the DCF (Design rule for Camera File system).
●JPEG (Joint Photographic Experts Group) : JPEG is the image compression standard developed by the Joint Photographic Experts Group. This type of compression is most commonly used for compressing photos and graphics because it can compress the files efficiently.
《36》
■If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures.
[Multi] : Exposure will be calculated based on an average of the available light in the image
area. However, the calculation will be biased towards the centre of the image
area. This is suitable for general use. [Spot] : Only the rectangular area in the centre of
the LCD monitor will be metered for light. This is suitable when the subject in the
centre is exposed correctly, regardless of the back lighting.
※If the subject is not the centre of the focus area, do not use the spot metering as this may result in an exposure error. In this circumstance, it is better to use exposure compensation.