PictBridge : Picture Selection
※ If you selected [Computer] in Step 4, when you connected the camera to your |
printer, the [Connecting Computer] message will display and the connection will |
not be established. In this case, disconnect the USB cable, and then follow the |
procedure from Step 2 and onward. Or, press the Printer button and the camera |
is connected to the printer displaying the [Connecting Printer] message. But, the |
camera may not connect to the printer, depending on the manufacturer and |
●Setting the Number of Copies to Print
-Select [One Pic] or [All Pics]. A screen where you can set the number of copies to print will appear as shown below.
model of the printer. |
W | 0prints | T |
W | 0Prints | T |
■ Easy printing |
|
When you connect the camera to printer in the Play | |
back mode, you can print a picture easily. | |
- Pressing the printer( | ) button : |
Set:OK |
[When [One Pic] is selected] |
| Exit:Shutter | Set:OK |
|
|
|
|
|
[When [All Pics] is selected] | |||
Currently displayed image will be printed with the |
printer’s default setting. |
- Pressing the Left / Right button : |
Selects a previous / next image. |
- Press the Up/ Down button to select the number of prints. |
- When [One Pic] is selected : Use the Left/ Right button to select another |
picture. After selecting another picture, select the number of prints for another |
picture. |
- After setting the number of prints, press the OK button to save. |
- Press the Shutter button to return to the menu without setting the number of |
■Select pictures to print
1. Press the Menu button.
2. The [IMAGES] menu will appear. |
|
|
| IMAGES | |
3. Use the UP and DOWN buttons to select the | One Pic | ||||
All Pics | |||||
desired sub menu value, and then press the OK | |||||
|
|
|
| ||
prints. |
PictBridge : Print Setting
button. |
|
|
|
|
When [One Pic] is selected |
| Exit:MENU | Move: |
|
|
|
|
| |
: The PictBridge function will be applied only to the |
|
|
|
|
picture currently displayed. |
|
|
|
|
When [All Pics] is selected |
|
|
|
|
:The PictBridge function will be applied to all pictures, excluding movie clips and voice files.
《56》
■AUTO SET
1.Use the LEFT and RIGHT buttons to select the [AUTO SET] menu tab.
2.Use the UP and DOWN buttons to select the desired sub menu value, and then press the OK button.
[Yes] : All values in the [CUSTOM SET] are automatically changed.
[No] : [CUSTOM SET] values are kept.
AUTO SET |
Yes |
No |
Move: |