Setup menu
[ Selecting Video out type ]
■The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI.
- | NTSC | : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico. |
- | PAL | : Australia, Austria, Belgium, China, Denmark, Finland, Germany, |
|
| U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, |
|
| Spain, Sweden, Switzerland, Thailand, Norway. |
■Connecting to an external monitor
●Using the USB cable with Cradle (Optional) : Connect the camera and the cradle. Connect the cradle to an external monitor with the supplied AV cable.
●Using the AV cable with Camera :
Connect the camera to an external monitor with the supplied AV cable.
| SETUP |
USB |
|
LCD | NTSC |
Video Out | PAL |
HDMI Out |
|
Quick View |
|
Back: | Set:OK |
-When using a TV as an external monitor, you will need to select the external or AV channel of the TV.
-There will be a digital noise on the external monitor, but it is not a malfunction.
-If the image is not in the centre of the screen, use the TV controls to centre it.
-When the camera is connected to an external monitor, the menu will be visible on the external monitor and the menu functions are the same as those indicated on the LCD monitor.
[Using the AV cable with Cradle]
Yellow - Video
[Using the AV cable with Camera] | White - sound |
《63》