SEVERE WARNING
WARNING
SIGNS FOR
INSTALLATION
• Do not install the freezer in a damp place or place where it may come in contact with water.
-Deteriorated insulation of electrical parts may cause an electric shock or fire.
•Do not place this freezer in direct sunlight or expose to the heat from stoves, room heaters or other appliance.
•Never use gas pipes, telephone lines or other potential lightening rods as ground.
-Improper use of the ground plug can result in electric shock.
•Do not plug several appliances into the same multiple power board. The freezer should always be plugged into its own individual electrical which has a voltage rating that matched the rating plate.
-This provides the best performance and also prevents overloading house wiring circuits, which could cause a fire hazard from overheated wires.
• Do not use a cord that shows
cracks or abrasion damage along its length or at either end.
•Do not bend the power cord excessively or place heavy articles on it.
• This freezer must be properly installed and located in accordance with the manual before it is used.
•If the wall socket is loose, do not insert the power plug.
-There is a risk of electric shock of fire.
•Connect the power plug in proper position with the cord hanging down.
-If you connect the power plug upside down, wire can get cut off and cause fire or electric shock.
•When moving the freezer, be careful not to roll over or damage the power cord.
-This constitutes a fire hazard.
• Make sure that the power plug is not squashed or damaged by the back of the freezer.
• Keep the packing materials out of reach of children.
-There is a risk of death from suffocation if children put them on their head.
English - 4
2016. 3. 24. 6:13 |