Setting the Speaker Mode
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Frequency response from the speaker will be adjusted according to your speaker configuration and whether certain speakers are used or not.
√ 
REMOTE CONTROL
1 Press SPK SELECT button to select the speaker you want.
•Each time you press this button, F.SPK ➝ C.SPK ➝ S.SPK ➝ SW SPK ➝
CROVR ➝ SPK MODE OFF will be selected in turn.
2 Press …† button to set the mode (Large, Small etc.) for the selected speaker.
3 Repeat steps
To Exit Setup Mode
• Wait for about 5 seconds or press the SPK SELECT button of the remote control to select SPK MODE OFF.
GB
MAIN UNIT
1 Press SETUP button.
•“SETUP MODE” appears on the display and enters into Setup Mode.
2 Press FUNCTION button 1 time.
• Each time you press this button, F.SPK ➝ C.SPK ➝ S.SPK ➝ SW SPK ➝ | OPERATION |
• “SPK SETUP” appears in the display. |
|
3 Press SURROUND button to select the speaker you |
|
want. |
|
CROVR will be selected in turn. |
|
4 Press SELECT ( , ) button to set the mode for the |
|
selected speaker. |
|
5 Repeat steps |
|
To Exit Setup Mode
•Wait for about 5 seconds or press SETUP button.
“SETUP MODE OFF” appears on the display and exits Setup Mode.
To turn the SUBWOOFER On or Off.
Press SUBWOOFER button on the remote.
•Each time you press this button, SW SPK : YES, SW SPK : NO will be selected in turn.
•If F.SPK is set to LARGE, you can select YES or NO for SW SPK.
•If F.SPK is set to SMALL, SW SPK is automatically set to YES. NO cannot be selected.
Setting the Speaker
SPEAKER | Possible Settings | Default Setting | |
F.SPK(Front) | LARGE,SMALL | SMALL | |
|
|
| |
C.SPK(Center) | LARGE,SMALL,NONE | SMALL | |
S.SPK(Surround) | LARGE,SMALL,NONE | SMALL | |
SW SPK(Subwoofer) | YES,NO | YES | |
|
|
| |
CROVR | 60,80,100,120, | 150Hz | |
(Crossover Frequency) | 150,180,200(Hz) | ||
| |||
|
|
|
•LARGE : Select when using large speakers. You can listen to full range sound.
•SMALL : Select when using small speakers.
Bass below 100Hz will not be output.
•NONE : Select when you use no speaker.
•YES(Subwoofer) : Select when using the Subwoofer Speaker.
•NO(Subwoofer) : Select when not using the Subwoofer Speaker.
•CROVR: Select the crossover frequency for the best bass response in your room.
20 | 21 |