Listening
to Radio
You can listen to the chosen band (FM, AM) by using either automatic or manual tuning.
Presetting
Radio Stations
You can preset up to 30 FM and AM stations.
REMOTE CONTROL
Ex) Setting station FM 89.10 in preset 2 .
GB
1 | Press TUNER button. | ||
| • Each time you press this button, FM ➝ AM will be selected in turn. | ||
2 |
|
|
|
Press Select button and then TUNING MODE button to | |||
| select 89.10. | ||
•Refer to step 2, page 38, to tune in automatically and manually.
REMOTE CONTROL
1 Press TUNER button.
•Each time you press this button, FM ➝ AM will be repetitively selected.
2 Select frequency.
•Automatic Tuning 1 :
1)Press TUNING MODE button to select PRESET.
2)Press TUNING/CH ( 
, 
) button to select the preset frequency.
•Automatic Tuning 2 :
1)Press TUNING MODE button to select MANUAL
2)Press and hold TUNING/CH ( 
, 
) button to automatically tune in frequency.
•Manual Tuning :
1)Press TUNING MODE button to select MANUAL.
2)Press TUNING/CH ( 
, 
) button briefly to increase or decrease the frequency step by step.
MAIN UNIT
1 Press FUNCTION button to select FM or AM.
2 Select the frequency.
•Automatic Tuning :
Press and hold TUNING( 
, 
) button to automatically tune in frequency.
•Manual Tuning :
Press TUNING( 
, 
) button briefly to increase or decrease the frequency step by step.
3 | Press TUNER MEMORY button. | ||
| • Tuner number will blink on the display. | ||
4 |
|
|
|
Press TUNING/CH( , ) button to select preset 2. | |||
• You can select from presets 1 to 30.
5 | Press TUNER MEMORY button. | RADIO | |||
| • Tuner number will disappear and station 89.10 will be saved in preset 2. |
| |||
6 |
|
|
| OPERATION | |
|
|
| |||
To preset other stations, repeat steps 2 to 5. | |||||
| |||||
To Listen to Preset Station
• Press TUNING MODE button of the remote control to select the PRESET and press TUNING/CH ( , ) button.
To Listen to Mono/Stereo
Press MO/ST button on the remote.
•Each time you press this button, STEREO, MONO will be selected in turn.
•If you select MONO in the area with weak reception, it will help to reduce noise.
•This function works only with the Remote Control.
How to select PRESET and MANUAL on the main unit.
1.Press the SETUP button.
2.Press the FUNCTION button 9 times.
•“TUNER SETUP” appears in the display.
3.Press the SURROUND button.
4.SELECT ( 
, 
) button to select MANUAL or PRESET.
38 | 39 |