

Digital
Input Setup
![]()
You must set the digital input for a DVD or CD player to either Optical or Coaxial depending on which Digital input you have your player connected to.
MAIN UNIT
DVD SETUP
1 Press SETUP button.
•“SETUP MODE” appears on the display and enters into Setup Mode.
2 Press FUNCTION button 3 times.
•“DIGITAL IN” appears on the display.
3 Press SURROUND button to select DVD.
4 Press SELECT(
,
) button to set the digital input.
•Each time you press this button, OPTICAL
COAXIAL will be selected in turn.
To Exit Setup Mode
•Wait for about 5 seconds or press SETUP button.
“SETUP MODE OFF” appears on the display and the unit exits Setup Mode.
CD SETUP
1 Press SETUP button.
•“SETUP MODE” appears on the display and enters into Setup Mode.
2 Press FUNCTION button 3 times.
•“DIGITAL IN” appears on the display.
3 Press SURROUND button to select CD.
4 Press SELECT(
,
) button to set the digital input.
•Each time you press this button, OPTICAL
COAXIAL will be selected in turn.
To Exit Setup Mode
•Wait for about 5 seconds or press SETUP button.
“SETUP MODE OFF” appears on the display and the unit exits Setup Mode.
GB
Setting
DRC (Dynamic Range Compression)
![]()
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
√ ![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
REMOTE CONTROL
Press DRC button.
•Each time you press this button, DRC : STD ➝ DRC : MAX ➝ DRC : MIN
will be selected in turn.
MAIN UNIT | OPERATION |
1 Press SETUP button. | |
• “SETUP MODE” appears on the display and enters into Setup Mode. |
|
2 Press FUNCTION button 4 times. |
|
• “DRC SETUP” appears on the display. |
|
3 Press SURROUND button. |
|
• “DRC : STD” appears on the display . |
|
4 Press SELECT(
,
) button to set DRC.
•Each time you press this button, DRC : STD ➝ DRC : MAX ➝ DRC : MIN
will be selected in turn.
To Exit Setup Mode
• Wait for about 5 seconds or press SETUP button.
“SETUP MODE OFF” appears on the display and the unit exits Setup Mode.
Setting DRC
•STD : Sets DRC effect to standard.
•MAX : Sets DRC effect to maximum.
•MIN : Sets DRC effect to minimum.
24 | 25 |