Samsung UE40D5520RWXXC, UE46D5500RWXXH, UE40D5500RWXXC, UE37D5500RWXXC Plug & Play Initial Setup

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERPbutton. Plug & Play is available only when the Source is set to TV.

✎✎Before turning on the TV, make sure the antenna cable is connected (p. 6).

1	Selecting a language
2	Setting the Network
3	Selecting Store
	Demo or Home Use

4 Selecting a country

5	ModeSetting the Clock
6	Selecting an antenna
7	Selecting a channel
8	Complete

Press the ▲ or ▼ button, then press the ENTEREbutton.	POWER
	P
Select the desired OSD (On Screen Display) language.
Set up your network connection. Press the ENTEREbutton
to start. If you want to setting to it later, select Skip. For more
information, refer to “Wired/Wireless Network Connection” in the
e-Manual.

Press the ◄ or ► button, then press the ENTEREbutton.

Select the Home Use mode. Store Demo mode is for retail environments.

To return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the TV. When you see the volume OSD, press and hold MENU for 5 sec.

Store Demo is only for shop display. If you select it, several functions are not able to use. Please select Home Use when you watch at home.

Press the ▲ or ▼ button, then press the ENTEREbutton. Select the appropriate country.

✎✎After selecting the country in the Country menu, some models may proceed with an additional option to setup the pin number.

✎✎When you input the PIN number, “0-0-0-0” is not available. Set the Clock Mode automatically or manually.

Auto: Select the time zone where you are located.

Manual: Allows you to manually set the current date and time.

Press the ▲ or ▼ button, then press the ENTEREbutton. Select the Antenna source. The option may differ depending on country.

Press the ▲ or ▼ button, then press the ENTEREbutton. Select the channel source to memorise. When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel → Memorising Channels in the e-Manual.

Press the ENTEREbutton.

If You Want to Reset This Feature...

Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”. If you want to change the PIN number, use the Change PIN function.

You should do Plug & Play (MENU → System) again at home although you did in shop.

✎✎If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on).

English - 7