Samsung UE46D8000YSXXC, UE40D8000YSXXH, UE60D8000YSXXC manual Connecting to a Common Interface slot

Page 12

Connecting to a COMMON INTERFACE slot

Attaching the CI Card Adapter

Attach the adapter as shown below.

To connect the CI CARD Adapter, follow these steps.

We recommend attaching the adapter before installing the wall mount, or inserting the “CI or CI+ CARD”.

1.Insert the CI CARD Adapter into the two holes on the product 1.

Please find a two holes on the rear of the TV. A two holes is beside the COMMON INTERFACE port.

2.Connect the CI CARD Adapter into the COMMON INTERFACE port on the product 2.

3.Insert the “CI or CI+ CARD”.

TV Rear

We recommand that you insert the CI card before you mount the TV on a wall. It may be difficult to insert after the mounting. Insert the card after attaching the CI Card Adapter on TV. It is difficult to attach the module if you insert the card before attaching.

Using the “CI or CI+ CARD”

To watch paid channels, the “CI or CI+ CARD” must be inserted.

•• If you don’t insert the “CI or CI+ CARD”, some channels will display the message “Scrambled Signal”.

•• The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.

•• When the configuration of channel information has finished, the message “Updating Completed” is displayed, indicating the channel list is updated.

NOTE

xx You must obtain a “CI or CI+ CARD” from a local cable service provider.

xx When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it.

xx Insert the “CI or CI+ CARD” in the direction marked on the card.

xx The location of the COMMON INTERFACE slot may be different depending on the model.

xx “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer. xx If you have any problems, please contact a service provider.

xx Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen.

English - 12

Image 12 Contents
Czech BN68-03442M-00Securing the Installation Space Digital TV noticeStill image warning 10 cmAccessories Scart Adapter 2 EA AV/Component AdapterHolder Ring 4 EA Viewing the Control Panel Viewing the Remote Control Installing batteries Battery size AAACalibrating the touch pad Connecting to an Antenna Changing the Input SourceUse to select TV or an external input Plug & Play Initial Setup Connecting to AV devices Using an Hdmi or an Hdmi to DVI cable up to 1080pComponent connection Connecting to an Audio device and PC Using an Optical Digital a Headphone ConnectionUsing an Hdmi cable or an Hdmi to DVI cable or a D-sub cable Connecting to a Common Interface slot Insert the CI Card Adapter into the two holes on the productNetwork Connection LAN Port onExternal Modem Shielded Twist PairHow to use the e-Manual This function is not enabled in some menusUsing the Zoom mode To return to the previous screen, press the Return buttonTry Now Displays the corresponding menus Zoom Magnifies a screen Index Displays index screenInstalling the Wall Mount Vesa Spec. a * B Standard Screw 75 X200 X 400 XSecuring the TV to the wall To Avoid the TV from FallingTroubleshooting Issues Solutions and ExplanationsLicence List of Features Storage and MaintenanceSpecifications Sécurisation de l’espace d’installation Avis concernant le téléviseur numériqueAvertissement d’image fixe Evitez d’afficher longuement la même chaîne de télévisionAccessoires Présentation du panneau de configuration Présentation de la télécommande Installation des piles type de pile AAACalibrage du touch pad Modification de la source d’entrée Raccordement à une antenneTelles que des lecteurs DVD/Blu-ray Satellite boîtiers décodeursPlug & Play configuration initiale Connexion à un périphérique AV Utilisation d’un câble Hdmi ou Hdmi vers DVI jusqu’à 1080pConnexion à composantes Connexion entre un PC et un périphérique audio Connexion PC Connexion à un port Interface Commune Connecter le module si vous insérez d’abord la carteArrière du téléviseur Connexion réseau Connecteur LANMural Connecteur modem mural Modem externeGuide e-Manual Cette fonction n’est pas disponible dans certains menusUtilisation du mode Zoom ‰‰ Changement du Mode Image prédéfiniInstallation du support mural SamsungVous électrocuter Fixation du téléviseur au mur MurRésolution des problèmes Problèmes Solutions et explicationsListe des fonctions Stockage et entretienCaractéristiques techniques Nota sobre la TV digital Advertencia sobre las imágenes fijasSeguridad en el espacio de instalación Se puede cobrar una tarifa administrativa si AccesoriosAdaptador Scart 2 unidades AV/Adaptador de componentes Soporte anilla 4 unidAspecto general del panel de control Aspecto general del mando a distancia Calibración del panel táctilInstalación de las pilas tamaño de las pilas AAA Cambio de la fuente de entrada Conexión de una antenaSe utiliza para seleccionar TV u otras Plug & Play configuración inicial TelevisorPara introducir el código PIN, 0-0-0-0 no está disponible Conexión a dispositivos AV Mediante un cable Hdmi o Hdmi a DVI hasta 1080pConexión de componentes Conexión de un PC y un dispositivo de audio Uso de una conexión de cable óptico digital o de auricularesMediante un cable HDMI, Hdmi a DVI o D-sub Conexión en una ranura de Interfaz Común Conexión de la red ParedMódem externo Panel posterior del TV Uso del manual electrónico Esta función no está disponible en algunos menúsReturn Instalación del montaje mural Pulgadas Tornillo estándarProducto 32~40 200 x 46~60 400 x 65~75 600 xFijación del televisor a la pared Solución de problemas Problemas Soluciones y explicacionesLicencia Listado de características Almacenamiento y mantenimientoEspecificaciones Aviso sobre a televisão digital Aviso relativo a imagens fixasManutenção de um espaço de instalação seguro Será cobrada uma taxa administrativa se AcessóriosAdaptador Scart 2 EA AV/Adaptador de componente Anel de suporte 4 EAApresentação do painel de controlo De esperaFonte Botão como utilizaria o botão Enter E do telecomandoApresentação do telecomando Calibrar a consola táctilColocação das pilhas Tamanho da pilha AAA Alteração da fonte de entrada Ligação a uma antenaUtilize esta opção para seleccionar o Satélite STBPlug & Play Configuração inicial De procura para aLigação a dispositivos AV Utilizar um cabo Hdmi ou Hdmi para DVI até 1080pLigação do componente Ligação a um dispositivo de áudio e a um PC Utilizar um cabo HDMI, um cabo HDMI/DVI ou um cabo D-sub Ligar a uma ranhura de Interface Comum Parte posterior do televisorLigação de rede Porta LAN naParede Modem externoApresentação do ecrã Como alternar entre o e-Manual e os menus correspondentesEsta função não está disponível em alguns menus Método Utilizar o modo ZoomPara regressar ao ecrã anterior, carregue no botão Instalação do suporte de montagem na parede Polegadas Espec. Vesa a * B Parafuso padrão Produtos19~22 75 X 23~27 200 X 32~40Fixação do televisor à parede Para evitar a queda do televisorResolução de problemas Problemas Soluções e explicaçõesLicença Lista de funções Armazenamento e manutençãoCaracterísticas técnicas This page is intentionally Left blank
Related manuals
Manual 46 pages 49.5 Kb Manual 338 pages 27.9 Kb Manual 338 pages 24.75 Kb Manual 1 pages 24.06 Kb Manual 82 pages 8.29 Kb Manual 337 pages 30.38 Kb Manual 344 pages 54.49 Kb Manual 338 pages 43.23 Kb Manual 338 pages 11.86 Kb Manual 337 pages 60.61 Kb Manual 82 pages 6.21 Kb Manual 337 pages 55.07 Kb Manual 337 pages 50.71 Kb Manual 337 pages 45.33 Kb Manual 337 pages 24.03 Kb Manual 1 pages 22.34 Kb Manual 338 pages 35.86 Kb Manual 2 pages 7.34 Kb