Getting Started
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically. ✎✎Preset: Connecting the power cord and antenna.
VHF/UHF Antenna
Cable
or | ANT OUT |
|
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of
✎✎To return to the previous step, press the Red button.
1 | Turn on the TV and |
Touch Control. |
yy Turn on the Touch Control and then tap OK on your remote.
✎✎It may take about one minute to establish a wireless connection between the TV and Touch Control using the Samsung Wireless LAN Adapter.
2 | Connect the Samsung |
Wireless LAN Adapter | |
3 | Selecting a language |
4 | Selecting Store Demo |
or Home Use | |
5 | Selecting an area |
6 | Selecting a channel |
7 | Setting the Clock |
8 | Viewing the HD |
Connection Guide. | |
9 | Enjoy your TV. |
yy Connect the Samsung Wireless LAN Adapter to the TV. You can connect the Samsung Wireless LAN Adapter using the method shown on page 31.
yy If the connection fails, reconnect the Samsung Wireless LAN Adapter and then try again.
Press the ▲ or ▼ button, then press the ENTEREbutton. Select the desired OSD (On Screen Display) language. Press the ◄ or ► button, then press the ENTEREbutton.
yy Select the Home Use mode. Store Demo mode is for retail environments.
yy To return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the TV. When you see the volume OSD, press and hold MENU for 5 sec.
Press the ENTEREbutton. Select the appropriate area by pressing the ▲ or ▼ button. Press the ENTEREbutton to confirm your choice.
The channel search will start and end automatically.
✎✎Press the ENTEREbutton at any time to interrupt the memorisation process.
✎✎After all the available channels are stored, the message Set current date and time is displayed.
Press the ENTEREbutton.
Select the Day, Month, Year, Hour, or Minute by pressing the ◄ or ► button. Set the Day, Month, Year, Hour, or Minute by pressing the ▲ or ▼ button.
✎✎You can also set the Day, Month, Year, Hour and Minute by pressing the number buttons on the remote control.
The connection method for the best HD screen quality is displayed.
Press the ENTEREbutton.
If You Want to Reset This Feature...
Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is